Turbofan E30M3 Electric Convection Oven

The Turbofan E30M3 is a 3 tray manual electric convection oven from Moffat, holding 3 x 1/1 GN pans in a low profile 810mm wide format. Part of the Turbofan 30 Series, it keeps things simple with a mechanical thermostat and 60 minute timer, and its generous 100mm tray spacing suits taller product that tighter ovens cannot fit. At 2.3kW it plugs straight into a standard 10A power point, making it the easiest oven in the Turbofan range to install.

Turbofan ovens are designed and manufactured by Moffat and backed by Moffat's Australia wide service and spare parts network. The E30M3 suits cafes, restaurants and event caterers that want reliable convection baking and roasting without digital controls or any electrical work. Bench mount it on the supplied stainless steel feet or pair it with the SK2731N stainless steel stand. Three chrome plated oven grids are supplied.

Best for: Cafes and event caterers that want a simple plug-in convection oven that runs off a standard power point.

Key features

SK2731N stainless steel oven stand, $990.00 plus GST

The matching Turbofan SK2731N stand puts the E30M3 at the perfect working height and adds tray storage underneath. All stainless steel welded frame with 6 tray runners for 600mm x 400mm trays and 1/1 GN pans, on 76mm swivel castors with front wheel locks. The same stand suits the E27, E28 and E31 series. Contact us to add the SK2731N to your order.

Double stacking

Two E30M3 ovens can be stacked using the DSK272831 double stacking kit, doubling your capacity in the same footprint. Contact us to discuss stacked configurations.

Frequently asked questions

Does the Turbofan E30M3 need special electrical installation?

No. At 2.3kW the E30M3 comes with a 10A cordset fitted and plugs straight into a standard power point, no hardwiring, no dedicated circuit and no electrician. It is the easiest commercial convection oven to install and a favourite for event catering where power is limited.

What trays does the Turbofan E30M3 take?

It holds 3 x 1/1 GN Gastronorm pans with 100mm spacing between shelves, more clearance than most convection ovens, so taller product fits without touching the shelf above. Three chrome plated oven grids are supplied.

What is the difference between the E30M3 and E31D4?

Same low profile 810mm cabinet. The E30M3 has manual controls, 3 trays and runs off a standard 10A power point. The E31D4 adds a fourth tray, digital controls with 20 programs and a 2kW grill mode, and needs a 15A outlet. If you want set and forget simplicity on a standard power point, the E30M3 is the one.

Can the E30M3 sit on a bench?

Yes. It comes with anti-skid adjustable stainless steel feet for bench mounting, or you can mount it on the SK2731N stainless steel stand with castors and tray storage underneath.

Does the E30M3 need to be under an exhaust hood?

No. At 2.3kW the E30M3 sits well under the 8kW limit for unhooded electric appliances in Australia, so a single unit does not require an exhaust hood. Ventilation requirements can vary by council, so check your local regulations if unsure.

Can the E30M3 be stacked?

Yes. Two E30M3 ovens stack using the DSK272831 double stacking kit, or the E30M3 can sit over a matching P Series prover or H Series holding cabinet.

Turbofan 30 series compared

All prices exclude GST.

What warranty comes with the Turbofan E30M3?

24 months parts and labour, backed by Moffat's Australia wide service network.

Warranty and support

• 24 months parts and labour warranty by Moffat
• Moffat national service and spare parts network

For enquiries please contact

Phone or Text: 0412 034948

Email: sales@eattucker.com