Scotsman NB 393 Slope Front Ice Storage Bin

Specifications from the Moffat Australia NB 393 spec sheet.

The Scotsman NB 393 is a slope front ice storage bin that holds up to 178kg of ice. It sits under a Scotsman modular ice maker head, which is sold separately, and sells for $1,880 ex GST. Scotsman ice storage bins are distributed and serviced in Australia by Moffat.

Best for: most modular installs. It fits more Scotsman heads than any other bin, from the MXG gourmet heads to the NW dice heads and MFN nugget heads.

NB 393 overview

The NB 393 is the all rounder of the range. It holds up to 178kg of ice, is 768mm wide, and fits more Scotsman heads than any other bin.

The slope front lets staff get to the ice without reaching over a high lip. The bin has a stainless steel exterior, a rotocast plastic hinged door, high density polyethylene insulation and rounded inside corners so it is easy to clean. The door gasket comes right off for cleaning, and there is a built in scoop holder.

Which ice makers fit the NB 393?

The NB 393 suits these Scotsman modular heads, from the Moffat price book. Some heads need a top cover so the head sits properly on the bin.

The CBT 30 52 AMCD top cover is $250 ex GST. The CBT 30 EFSD top cover is $1,388 ex GST. Order the cover with the bin if your head needs one.

To stack a second head on top for more ice, use the KSC 400-800 stacking kit for the NW 457 and NW 608 ($649 ex GST) or the KSC 1000 stacking kit for the NW 1008 ($717 ex GST).

Which storage bin do I need?

All five are Scotsman slope front bins with a stainless steel exterior and hinged door. Pick on capacity and the space you have, then check the bin suits your head.

Warranty and support

3 year parts and labour warranty, backed by Moffat Australia with on site service Australia wide. It covers faults in parts and workmanship under normal commercial use. Routine cleaning isn't covered. See all Scotsman ice makers or read our warranty page.

Frequently asked questions

Does the NB 393 come with an ice maker?
No. The NB 393 is the storage bin only. It sits under a Scotsman modular ice maker head, which you buy separately. The table above shows which heads fit.

How much ice does the NB 393 hold?
Up to 178kg, based on the bin 90% full. On the AHRI industry rating, which is based on 80% full, it is 141kg. Plan on the lower figure if you want a safe margin.

Does the NB 393 need a top cover?
It depends on the head. the CBT 30 52 AMCD ($250) is needed for NW 307 AS OX, NWH 307 AS OX, NW 507 AS OX, NWH 507 AS OX, NWL 507 AS OX; the CBT 30 EFSD ($1,388) is needed for MFN S 47 AS OX, MFN S 57 AS OX. The other heads in the table sit straight on the bin.

How tall is the NB 393 with an ice maker on top?
Add the height of the head to the bin's 1039mm. For example, the MXG M 437 AS OX is 721mm high, so together they stand about 1760mm, plus any top cover. Check your ceiling height and leave room above the head for air and service.

How does the NB 393 drain?
It has a 20mm drain. The supplied drain hose runs to a floor waste or drain lower than the bin.

What comes with the NB 393?
The bin comes with an ice scoop, a water hose and a drain hose. Top covers and stacking kits are ordered separately if your head needs them.

Do you have scratch and dent NB 393 bins?
Sometimes. Moffat occasionally has units with freight damage or ex-display stock at a lower price. It comes down to availability, so ask us if you want one.

Contact

Phone or Text: 0412 034948
Email: sales@eattucker.com

3 year parts and labour warranty, backed by Moffat Australia with on site service Australia wide. Covers faults in parts and workmanship under normal commercial use. Routine cleaning, descaling and filter maintenance aren't covered.