Turbofan P12M Prover and Holding Cabinet

The Turbofan P12M is the tall version of the P8M, a dual function prover and holding cabinet from Moffat holding 12 full size 460mm x 660mm sheet pans or 24 half size pans in the same 735mm wide footprint. Switch it between Prove mode for raising dough with heat and humidity, and Hold mode for keeping cooked food at serving temperature. It is sized to sit under a Turbofan E32D4 or G32D4 convection oven, or roll anywhere on its castors as a standalone unit.

Turbofan provers are designed and manufactured by Moffat and backed by Moffat's Australia wide service and spare parts network. The P12M runs a gentle low velocity fan, mechanical thermostat from 20 to 85 degrees and humidity control fed by an auto fill water tank that lifts out for cleaning without tools. Full double skin stainless construction keeps the heat in and the running costs down, and at 1.9kW it plugs straight into a standard power point.

Best for: Bakeries proving at volume that want 12 full size trays under their Turbofan oven.

Key features

Frequently asked questions

What does a prover and holding cabinet do?

Two jobs in one cabinet. In Prove mode it holds the gentle warmth and humidity that dough needs to rise properly before baking, croissants, bread, pizza bases and buns. In Hold mode it keeps cooked food at safe serving temperature without drying it out. If you bake in the morning and hold food through service, one cabinet covers both.

What is the difference between the P8M and P12M?

Same 735mm footprint, same controls, same oven compatibility. The P12M is 215mm taller and holds 12 full size trays against the P8M's 8. If you have the ceiling height, the extra 4 trays cost very little more. Note the taller cabinet puts an oven stacked on top at a higher working level, so check your reach before choosing.

Does the Turbofan P12M need special electrical installation?

No. At 1.9kW drawing 8A, the P12M comes with a 10A cordset fitted and plugs straight into a standard power point, no electrician needed.

Can an oven sit on top of the P12M?

Yes. The P12M is sized to carry a Turbofan E32D4 or G32D4 convection oven on top, prove underneath, bake above, all in one 735mm footprint on castors. Contact us to price the oven and prover combination together.

Does the P12M need a water connection?

No. The humidity system runs from a built in auto fill water tank that lifts out for cleaning without tools. If you want it plumbed, there is an optional cold water 3/4" BSP connection, and an optional 3M Cuno water filter kit that installs flush in the rear housing.

What trays does the Turbofan P12M take?

It holds 12 x 460mm x 660mm full size sheet pans or 24 x 460mm x 330mm half size pans with 74mm spacing. An optional racking kit converts it to 12 x 400mm x 600mm trays.

Turbofan P series provers and holding cabinets compared

All prices exclude GST.

What warranty comes with the Turbofan P12M?

24 months parts and labour, backed by Moffat's Australia wide service network.

Warranty and support

• 24 months parts and labour warranty by Moffat
• Moffat national service and spare parts network

For enquiries please contact

Phone or Text: 0412 034948

Email: sales@eattucker.com