Product Overview

Model	MX30AT7R
Type	Chiller/freezer
Trays	10 x 1GN
Spacing	70mm
Chill	30kg per cycle
Freeze	15kg per cycle
Control	Touch screen
Programs	40 cycles
Door	RHS hinge
Feet	Adjustable
Power	15A 240V
Weight	150kg
Width	770mm
Depth	790mm
Height	1565mm
Warranty	2 years
Made by	Friginox
Country	France

10-tray reach-in blast chiller and freezer from Friginox, built for kitchens running high volume batch cooking that need to hit HACCP chill times every time.

The 7" touch screen keeps it simple on the floor. Staff pick hard or soft chill, hard or soft freeze, or let the self-adaptive mode read the core probe and adjust the cabinet temperature on its own so the surface of the food doesn't freeze before the core catches up. Three-point core probe gives an accurate read instead of guessing off the outside of the product.

Ten pairs of runners come standard and adjust to two spacings, so the cabinet handles GN pans or 600 x 400mm bakery trays without swapping hardware. The automatic fan stop cuts the evaporator fans the moment the door opens, and the door latches open on its own when the unit's not running so the cabinet can air out instead of holding moisture.

Cabinet is 304 stainless steel inside and out, 60mm foam insulation, heated door frame to stop condensation building up round the seal. Runs on R455A refrigerant.

Best for

Hotels, hospitals, larger catering operations and busy restaurants doing batch cooking who need consistent chill and freeze results across a full HACCP program, not just an occasional blast.

FAQs

Can it run on 15A power?
Yes, it's set up for a single-phase 15A supply, 1.8kW draw.

Does it come with left hinge doors?
Standard build is right hinge. Left hinge is available, just let us know when you order.

What trays does it take?
1/1 GN pans or 600 x 400mm bakery trays, on the supplied adjustable runners.

What's the difference between hard and soft chill?
Soft chill runs a gentler air temperature for delicate items, hard chill pulls heat out faster for denser product. The self-adaptive mode picks between the two based on the core probe reading.