Product Overview
| Model | RN8609GL-L |
| Product | Gas cooktop |
| Grill plate | 900mm, full width |
| Grill burners | 3 x 20MJ/hr |
| Grill surface | 892 x 475mm |
| Total gas | 60MJ/hr (16.6kW) |
| Gas type | Natural gas or LPG |
| Gas connection | 3/4 inch BSP male |
| Pilot | Standard on every burner |
| Flame failure | Standard on every burner |
| Hood | Required |
| Width | 900mm |
| Depth | 818mm |
| Height bench | 415mm low back, 570mm high back |
| Height on base | 975mm low back, 1130mm high back |
| Splashback | Low (L) or high (H) |
| Finish | Stainless, Cue or Bold |
| Fridge base | 2 GN 1/1 drawers, 10A plug |
| Weight | 129kg, 180kg on cabinet |
| Made by | Moffat |
| Made in | New Zealand |
| Warranty | 2 years on site |
The Waldorf RN8609G is a 900mm gas cooktop with a full width 900mm grill plate over three 20MJ/hr burners, 60MJ/hr in total. Every burner has its own pilot and flame failure as standard, and it runs on natural gas or LPG. It comes on a bench model, leg stand, open cabinet, cabinet, cabinet with doors or fridge base, with a low or high back, in stainless or with a Cue or Bold enamel finish. Made in New Zealand by Moffat, with 2 years on site parts and labour.
Best for: a busy breakfast cafe, burgers and steaks in volume, or a line that already has burners and needs a big flat cooking surface.
RN8609G overview
The RN8609G is the full grill model in the 900mm Waldorf gas cooktop line up. The other 900mm tops are the RN8600G (6 open burners), the RN8603G (4 burners, 300mm grill) and the RN8606G (2 burners, 600mm grill), all at the same price. Any 300mm section can be a grill plate at no extra cost. The RN8609GL is the low back model and the RN8609GH is the high back, same price.
Choose your base, splashback and finish
Pick the base, then the low back (L) or high back (H), then the finish. The model code and price on this page change to match the base and finish you pick. The code shows the low back. For the high back, the L in the code becomes an H, same price. Prices are for stainless with the low or high back, plus GST.
| Base | Model | Price |
| Bench model | RN8609GL-B | $5,880 |
| Leg stand | RN8609GL-L | $6,480 |
| Open cabinet | RN8609GL-O | $7,380 |
| Cabinet | RN8609GL-C | $7,380 |
| Cabinet with doors | RN8609GL-D | $8,180 |
| Fridge base | RN8609GL-R | $14,280 |
| Finish | What it is | Codes | Extra |
| Stainless | Standard stainless | none | Included |
| Cue | Enamel control panel | C0 black, C2 chilli red, C3 burgundy | $480 |
| Bold | Enamel control and front panels, open cabinet, cabinet and fridge bases | B0 black, B2 chilli red, B3 burgundy | $880 on the open cabinet or cabinet, $1,380 on the cabinet with doors or fridge base |
The grill plate
The grill plate is 12mm steel with a smooth machined finish, 892 x 475mm, over three 20MJ/hr burners. Each burner under the plate has its own gas valve from high to low.
Every burner now has its own pilot and flame failure as standard. With a pilot, you can turn a burner off and light it again straight away, instead of leaving it running or lighting it every time you want it. The cast iron vent top comes off for cleaning, the valves have surrounds that protect them from cleaning chemicals, and the rounded bullnose has no sharp corners to catch grime. All parts are reached from the front for service.
Read more about what changed in our Waldorf Continuum gas cooktops post.
Which 900mm Waldorf gas cooktop do I need?
All four are 900mm wide with the same bases, finishes and prices. The difference is the top.
| Model | RN8600G | RN8603G | RN8606G | RN8609G |
| Top | 6 open burners | 4 burners, 300mm grill | 2 burners, 600mm grill | 900mm grill |
| Total gas | 168MJ/hr | 132MJ/hr | 96MJ/hr | 60MJ/hr |
| From | $5,880 | $5,880 | $5,880 | $5,880 |
Warranty and support
2 years on site parts and labour by Moffat Australia. See our warranty page for the details.
Frequently asked questions
Who makes the Waldorf RN8609G?
Moffat makes the Waldorf RN8609G in New Zealand, and backs it in Australia with 2 years on site parts and labour.
What is the difference between the RN8609GL and the RN8609GH?
Only the splashback. The RN8609GL has the low back, 415mm high on the bench model and 975mm on a base. The RN8609GH has the high back, 570mm on the bench model and 1130mm on a base. Both are the same price. Just pick the splashback on this page.
What bases can I get the RN8609G on?
Bench model, leg stand, open cabinet, cabinet, cabinet with doors or fridge base. Just pick the base on this page.
What is the fridge base?
The fridge base has two GN 1/1 drawers that take pans up to 100mm deep, and holds -2 to +8°C. It is rated for tropical kitchens and runs off its own 240V power point with a 10A plug. The condenser comes out through the front for cleaning.
What is the Cue finish?
Cue puts a vitreous enamel finish on the control panel, in black, chilli red or burgundy. It adds $480 plus GST.
What is the Bold finish?
Bold puts a vitreous enamel finish on the control panel and the front panels, in black, chilli red or burgundy. It comes on the open cabinet, cabinet, cabinet with doors and fridge base only. It adds $880 on the open cabinet or cabinet, and $1,380 on the cabinet with doors or fridge base, plus GST.
Can I change the splashback or colour later?
Yes. Swapping between the low and high back is a simple change, and the panels can be changed later if you want to upgrade the look.
What do the codes on the end of the model mean?
The letter after the dash is the base: B bench model, L leg stand, O open cabinet, C cabinet, D cabinet with doors, R fridge base. C0, C2 and C3 are Cue and B0, B2 and B3 are Bold, where 0 is black, 2 is chilli red and 3 is burgundy. So RN8609GH-C-B2 is the high back on a cabinet with the Bold finish in chilli red. No colour code means stainless.
What is the grill plate on the RN8609G?
The grill plate is 12mm steel with a smooth machined finish, 892 x 475mm, over three 20MJ/hr burners. Each burner under the plate has its own gas valve from high to low.
What is the difference between a grill plate and a griddle?
The grill plate on a cooktop is a flat plate over a gas burner, set by a gas valve from high to low. A dedicated griddle has the plate across the whole top, a thicker plate and a thermostat for more precise control.
Can I get the RN8609G with a different top?
Yes. The other 900mm tops are the RN8600G (6 open burners), the RN8603G (4 burners, 300mm grill) and the RN8606G (2 burners, 600mm grill). Any 300mm section can be a grill plate at no extra cost, and all four are the same price.
Does the RN8609G run on natural gas or LPG?
Either. Just let us know which when you order. It comes with the regulator and a conversion kit.
What gas connection does the RN8609G need?
A 3/4 inch BSP male connection at the rear. Your gas fitter connects it.
How much gas does the RN8609G use?
Each grill burner is rated at 20MJ/hr, so 60MJ/hr with everything on full.
Does the RN8609G have a pilot and flame failure?
Yes. Every burner has its own pilot and flame failure as standard. With a pilot, you can turn a burner off and light it again straight away, instead of leaving it running or lighting it every time you want it.
Do I need a hood over the RN8609G?
Yes. All gas cooking equipment needs a hood to take away the exhaust gases.
How do I clean the RN8609G?
The cast iron vent top comes off for cleaning. Scrape the grill plate down while it is warm, and the spill trays are enamelled so they come out and wipe down.
Can I get rollers on the RN8609G?
Yes. Rollers for the rear are available as an extra on the leg stand and cabinet bases. Standard is legs with adjustable feet.
What are the dimensions of the RN8609G?
900mm wide and 818mm deep. With the low back it is 415mm high on the bench model and 975mm on any of the bases. With the high back it is 570mm and 1130mm.
How much does the RN8609G weigh?
129kg on the bench model or leg stand, and 180kg on a cabinet or fridge base.
How much is delivery on the RN8609G?
Delivery is typically $120 plus GST. Use the Freight Cost Guide button on this page for the exact price to your postcode, including whether a tailgate is needed.
Do you ever have scratch and dent RN8609G cooktops?
Sometimes. These are Moffat units with freight damage or ex display stock, subject to availability. Ask us what is on hand.
Contact
Phone or Text: 0412 034948
Email: sales@eattucker.com