Waldorf RN8606GL-L 900mm Two Burner 600mm Grill Gas Cooktop

Price: $6,480.00 plus GST
$7,128.00 inc GST
SKU:
RN8606GL-L
Weight:
129.00 KGS

Product Overview

ModelRN8606GL-L
ProductGas cooktop
Burners2 open burners, 28MJ/hr each
Grill plate600mm, right side
Grill burners2 x 20MJ/hr
Grill surface592 x 475mm
Total gas96MJ/hr (26.6kW)
Gas typeNatural gas or LPG
Gas connection3/4 inch BSP male
PilotStandard on every burner
Flame failureStandard on every burner
CleaningLift out burners
HoodRequired
Width900mm
Depth818mm
Height bench415mm low back, 570mm high back
Height on base975mm low back, 1130mm high back
SplashbackLow (L) or high (H)
FinishStainless, Cue or Bold
Fridge base2 GN 1/1 drawers, 10A plug
Weight129kg, 180kg on cabinet
Made byMoffat
Made inNew Zealand
Warranty2 years on site

The Waldorf RN8606G is a 900mm gas cooktop with two 28MJ/hr open burners and a 600mm grill plate on the right, 96MJ/hr in total. Every burner has its own pilot and flame failure as standard, and it runs on natural gas or LPG. It comes on a bench model, leg stand, open cabinet, cabinet, cabinet with doors or fridge base, with a low or high back, in stainless or with a Cue or Bold enamel finish. Made in New Zealand by Moffat, with 2 years on site parts and labour.

Best for: a breakfast or burger line that needs a big grill with a couple of burners for sauces and sides.

RN8606G overview

The RN8606G is the two burner and 600mm grill model in the 900mm Waldorf gas cooktop line up. The other 900mm tops are the RN8600G (6 open burners), the RN8603G (4 burners, 300mm grill) and the RN8609G (900mm grill), all at the same price. Any 300mm section can be a grill plate at no extra cost. The RN8606GL is the low back model and the RN8606GH is the high back, same price.

Choose your base, splashback and finish

Pick the base, then the low back (L) or high back (H), then the finish. The model code and price on this page change to match the base and finish you pick. The code shows the low back. For the high back, the L in the code becomes an H, same price. Prices are for stainless with the low or high back, plus GST.

BaseModelPrice
Bench modelRN8606GL-B$5,880
Leg standRN8606GL-L$6,480
Open cabinetRN8606GL-O$7,380
CabinetRN8606GL-C$7,380
Cabinet with doorsRN8606GL-D$8,180
Fridge baseRN8606GL-R$14,280
FinishWhat it isCodesExtra
StainlessStandard stainlessnoneIncluded
CueEnamel control panelC0 black, C2 chilli red, C3 burgundy$480
BoldEnamel control and front panels, open cabinet, cabinet and fridge basesB0 black, B2 chilli red, B3 burgundy$880 on the open cabinet or cabinet, $1,380 on the cabinet with doors or fridge base

The burners and grill plate

Each open burner is rated at 28MJ/hr, with a cast iron cap and a gas valve that runs from high to low with settings in between for finer control. The burners lift right out for cleaning or soaking, and sit snugly on the venturi so they do not seize like the old fixed burners. The potstands are enamelled cast iron.

The grill plate is 12mm steel with a smooth machined finish, 592 x 475mm, over two 20MJ/hr burners. Each burner under the plate has its own gas valve from high to low.

Every burner now has its own pilot and flame failure as standard. With a pilot, you can turn a burner off and light it again straight away, instead of leaving it running or lighting it every time you want it. The cast iron vent top comes off for cleaning, the valves have surrounds that protect them from cleaning chemicals, and the rounded bullnose has no sharp corners to catch grime. All parts are reached from the front for service.

Read more about what changed in our Waldorf Continuum gas cooktops post.

Which 900mm Waldorf gas cooktop do I need?

All four are 900mm wide with the same bases, finishes and prices. The difference is the top.

ModelRN8600GRN8603GRN8606GRN8609G
Top6 open burners4 burners, 300mm grill2 burners, 600mm grill900mm grill
Total gas168MJ/hr132MJ/hr96MJ/hr60MJ/hr
From$5,880$5,880$5,880$5,880

Warranty and support

2 years on site parts and labour by Moffat Australia. See our warranty page for the details.

Frequently asked questions

Who makes the Waldorf RN8606G?
Moffat makes the Waldorf RN8606G in New Zealand, and backs it in Australia with 2 years on site parts and labour.

What is the difference between the RN8606GL and the RN8606GH?
Only the splashback. The RN8606GL has the low back, 415mm high on the bench model and 975mm on a base. The RN8606GH has the high back, 570mm on the bench model and 1130mm on a base. Both are the same price. Just pick the splashback on this page.

What bases can I get the RN8606G on?
Bench model, leg stand, open cabinet, cabinet, cabinet with doors or fridge base. Just pick the base on this page.

What is the fridge base?
The fridge base has two GN 1/1 drawers that take pans up to 100mm deep, and holds -2 to +8°C. It is rated for tropical kitchens and runs off its own 240V power point with a 10A plug. The condenser comes out through the front for cleaning.

What is the Cue finish?
Cue puts a vitreous enamel finish on the control panel, in black, chilli red or burgundy. It adds $480 plus GST.

What is the Bold finish?
Bold puts a vitreous enamel finish on the control panel and the front panels, in black, chilli red or burgundy. It comes on the open cabinet, cabinet, cabinet with doors and fridge base only. It adds $880 on the open cabinet or cabinet, and $1,380 on the cabinet with doors or fridge base, plus GST.

Can I change the splashback or colour later?
Yes. Swapping between the low and high back is a simple change, and the panels can be changed later if you want to upgrade the look.

What do the codes on the end of the model mean?
The letter after the dash is the base: B bench model, L leg stand, O open cabinet, C cabinet, D cabinet with doors, R fridge base. C0, C2 and C3 are Cue and B0, B2 and B3 are Bold, where 0 is black, 2 is chilli red and 3 is burgundy. So RN8606GH-C-B2 is the high back on a cabinet with the Bold finish in chilli red. No colour code means stainless.

What is the grill plate on the RN8606G?
The grill plate is 12mm steel with a smooth machined finish, 592 x 475mm, over two 20MJ/hr burners. Each burner under the plate has its own gas valve from high to low.

What is the difference between a grill plate and a griddle?
The grill plate on a cooktop is a flat plate over a gas burner, set by a gas valve from high to low. A dedicated griddle has the plate across the whole top, a thicker plate and a thermostat for more precise control.

Can I get the grill on the left?
Yes. The grill sits on the right as standard, or on the left if you let us know when you order.

Can I get the RN8606G with a different top?
Yes. The other 900mm tops are the RN8600G (6 open burners), the RN8603G (4 burners, 300mm grill) and the RN8609G (900mm grill). Any 300mm section can be a grill plate at no extra cost, and all four are the same price.

How fine is the burner control?
Each gas valve runs from high to low, with settings in between for finer control.

Does the RN8606G run on natural gas or LPG?
Either. Just let us know which when you order. It comes with the regulator and a conversion kit.

What gas connection does the RN8606G need?
A 3/4 inch BSP male connection at the rear. Your gas fitter connects it.

How much gas does the RN8606G use?
Each open burner is rated at 28MJ/hr and each grill burner at 20MJ/hr, so 96MJ/hr with everything on full.

Does the RN8606G have a pilot and flame failure?
Yes. Every burner has its own pilot and flame failure as standard. With a pilot, you can turn a burner off and light it again straight away, instead of leaving it running or lighting it every time you want it.

Do I need a hood over the RN8606G?
Yes. All gas cooking equipment needs a hood to take away the exhaust gases.

How do I clean the RN8606G?
The burners lift right out for cleaning or soaking, and the cast iron vent top comes off. Scrape the grill plate down while it is warm, and the spill trays are enamelled so they come out and wipe down.

Can I get rollers on the RN8606G?
Yes. Rollers for the rear are available as an extra on the leg stand and cabinet bases. Standard is legs with adjustable feet.

What are the dimensions of the RN8606G?
900mm wide and 818mm deep. With the low back it is 415mm high on the bench model and 975mm on any of the bases. With the high back it is 570mm and 1130mm.

How much does the RN8606G weigh?
129kg on the bench model or leg stand, and 180kg on a cabinet or fridge base.

How much is delivery on the RN8606G?
Delivery is typically $120 plus GST. Use the Freight Cost Guide button on this page for the exact price to your postcode, including whether a tailgate is needed.

Do you ever have scratch and dent RN8606G cooktops?
Sometimes. These are Moffat units with freight damage or ex display stock, subject to availability. Ask us what is on hand.

Contact

Phone or Text: 0412 034948
Email: sales@eattucker.com

Warranty Information

2 years on site parts and labour by Moffat Australia