Waldorf RN8203GL-L 300mm Grill Gas Cooktop

Price: $3,280.00 plus GST
$3,608.00 inc GST
SKU:
RN8203GL-L
Weight:
47.00 KGS

Product Overview

ModelRN8203GL-L
ProductGas cooktop
Grill plate300mm, full width
Grill burner20MJ/hr
Grill surface292 x 475mm
Total gas20MJ/hr (5.5kW)
Gas typeNatural gas or LPG
Gas connection1/2 inch BSP male
PilotStandard
Flame failureStandard
HoodRequired
Width300mm
Depth818mm
Height bench415mm low back, 570mm high back
Height on base975mm low back, 1130mm high back
SplashbackLow (L) or high (H)
FinishStainless, Cue or Bold
Weight47kg
Made byMoffat
Made inNew Zealand
Warranty2 years on site

The Waldorf RN8203G is a 300mm gas cooktop with a full width 300mm grill plate over a 20MJ/hr burner. The grill burner has a pilot and flame failure as standard, and it runs on natural gas or LPG. It comes on a bench model, leg stand, cabinet or cabinet with doors, with a low or high back, in stainless or with a Cue or Bold enamel finish. Made in New Zealand by Moffat, with 2 years on site parts and labour.

Best for: eggs, bacon and burgers beside a burner top, a small breakfast station, or adding a flat cooking surface to a line short on space.

RN8203G overview

The RN8203G is the grill model in the 300mm Waldorf gas cooktop line up. The other 300mm top is the RN8200G (2 open burners). If you need more burners, the 600mm RN8400G has four. The RN8203GL is the low back model and the RN8203GH is the high back, same price.

Choose your base, splashback and finish

Pick the base, then the low back (L) or high back (H), then the finish. The model code and price on this page change to match the base and finish you pick. The code shows the low back. For the high back, the L in the code becomes an H, same price. Prices are for stainless with the low or high back, plus GST.

BaseModelPrice
Bench modelRN8203GL-B$3,280
Leg standRN8203GL-L$3,280
CabinetRN8203GL-C$3,680
Cabinet with doorsRN8203GL-D$3,980
FinishWhat it isCodesExtra
StainlessStandard stainlessnoneIncluded
CueEnamel control panelC0 black, C2 chilli red, C3 burgundy$180
BoldEnamel control and front panels, cabinet bases onlyB0 black, B2 chilli red, B3 burgundy$380 on the cabinet, $480 on the cabinet with doors

The grill plate

The grill plate is 12mm steel with a smooth machined finish, 292 x 475mm, over a 20MJ/hr burner. It is set by a gas valve from high to low. The grill burner has a pilot and flame failure as standard, so you can turn it off and light it again straight away, instead of leaving it running or lighting it every time you want it.

The cast iron vent top comes off for cleaning, the valves have surrounds that protect them from cleaning chemicals, and the rounded bullnose has no sharp corners to catch grime. The spill trays are enamelled and all parts are reached from the front for service.

Read more about what changed in our Waldorf Continuum gas cooktops post.

Which 300mm Waldorf gas cooktop do I need?

Both are 300mm wide with the same bases and finishes. The difference is the top.

ModelRN8200GRN8203G
Top2 open burners300mm grill
Total gas56MJ/hr20MJ/hr
From$3,280$3,280

Warranty and support

2 years on site parts and labour by Moffat Australia. See our warranty page for the details.

Frequently asked questions

Who makes the Waldorf RN8203G?
Moffat makes the Waldorf RN8203G in New Zealand, and backs it in Australia with 2 years on site parts and labour.

What is the difference between the RN8203GL and the RN8203GH?
Only the splashback. The RN8203GL has the low back, 415mm high on the bench model and 975mm on a base. The RN8203GH has the high back, 570mm on the bench model and 1130mm on a base. Both are the same price. Just pick the splashback on this page.

What bases can I get the RN8203G on?
Bench model, leg stand, cabinet or cabinet with doors. Just pick the base on this page.

What is the Cue finish?
Cue puts a vitreous enamel finish on the control panel, in black, chilli red or burgundy. It adds $180 plus GST.

What is the Bold finish?
Bold puts a vitreous enamel finish on the control panel and the front panels, in black, chilli red or burgundy. It comes on the cabinet and cabinet with doors only, and adds $380 on the cabinet and $480 on the cabinet with doors, plus GST.

Can I change the splashback or colour later?
Yes. Swapping between the low and high back is a simple change, and the panels can be changed later if you want to upgrade the look.

What do the codes on the end of the model mean?
The letter after the dash is the base: B bench model, L leg stand, C cabinet, D cabinet with doors. C0, C2 and C3 are Cue and B0, B2 and B3 are Bold, where 0 is black, 2 is chilli red and 3 is burgundy. So RN8203GH-C-B2 is the high back on a cabinet with the Bold finish in chilli red. No colour code means stainless.

What is the grill plate on the RN8203G?
The grill plate is 12mm steel with a smooth machined finish, 292 x 475mm, over a 20MJ/hr burner. It is set by a gas valve from high to low.

What is the difference between a grill plate and a griddle?
The grill plate on a cooktop is a flat plate over a gas burner, set by a gas valve from high to low. A dedicated griddle has the plate across the whole top, a thicker plate and a thermostat for more precise control.

Can I get the RN8203G with burners?
Yes. The RN8200G has two 28MJ/hr open burners instead of the grill plate.

Does the RN8203G run on natural gas or LPG?
Either. Just let us know which when you order. It comes with the regulator and a conversion kit.

What gas connection does the RN8203G need?
A 1/2 inch BSP male connection at the rear. Your gas fitter connects it.

How much gas does the RN8203G use?
The grill burner is rated at 20MJ/hr.

Does the RN8203G have a pilot and flame failure?
Yes. The grill burner has a pilot and flame failure as standard. With a pilot, you can turn it off and light it again straight away, instead of leaving it running or lighting it every time you want it.

Do I need a hood over the RN8203G?
Yes. All gas cooking equipment needs a hood to take away the exhaust gases.

How do I clean the RN8203G?
The cast iron vent top comes off for cleaning. Scrape the grill plate down while it is warm, and the spill trays are enamelled so they come out and wipe down.

Can I get rollers on the RN8203G?
Yes. Rollers for the rear are available as an extra on the leg stand and cabinet bases. Standard is legs with adjustable feet.

What are the dimensions of the RN8203G?
300mm wide and 818mm deep. With the low back it is 415mm high on the bench model and 975mm on any of the bases. With the high back it is 570mm and 1130mm.

How much does the RN8203G weigh?
47kg.

How much is delivery on the RN8203G?
Delivery is typically $120 plus GST. Use the Freight Cost Guide button on this page for the exact price to your postcode, including whether a tailgate is needed.

Do you ever have scratch and dent RN8203G cooktops?
Sometimes. These are Moffat units with freight damage or ex display stock, subject to availability. Ask us what is on hand.

Contact

Phone or Text: 0412 034948
Email: sales@eattucker.com

Warranty Information

2 years on site parts and labour by Moffat Australia