Product Overview
| Model | RN8400GL-L |
| Product | Gas cooktop |
| Burners | 4 open burners |
| Burner rating | 28MJ/hr each |
| Total gas | 112MJ/hr (31kW) |
| Gas type | Natural gas or LPG |
| Gas connection | 3/4 inch BSP male |
| Pilot | Standard on every burner |
| Flame failure | Standard on every burner |
| Cleaning | Lift out burners |
| Hood | Required |
| Potstands | Cast iron, enamelled |
| Width | 600mm |
| Depth | 818mm |
| Height bench | 415mm low back, 570mm high back |
| Height on base | 975mm low back, 1130mm high back |
| Splashback | Low (L) or high (H) |
| Finish | Stainless, Cue or Bold |
| Weight | 80kg |
| Made by | Moffat |
| Made in | New Zealand |
| Warranty | 2 years on site |
The Waldorf RN8400G is a 600mm gas cooktop with four 28MJ/hr open burners, 112MJ/hr in total. Every burner has its own pilot and flame failure as standard, and the burners lift right out for cleaning. It runs on natural gas or LPG. It comes on a bench model, leg stand, cabinet or cabinet with doors, with a low or high back, in stainless or with a Cue or Bold enamel finish. Made in New Zealand by Moffat, with 2 years on site parts and labour.
Best for: a cafe or small kitchen that needs four burners in 600mm, a side station next to a fryer or griddle, or adding burners to a busy line.
RN8400G overview
The RN8400G is the four burner model in the 600mm Waldorf gas cooktop line up. If you want a grill plate, the RN8403G has two burners and a 300mm grill, and the RN8406G has a full 600mm grill, all at the same price. The RN8400GL is the low back model and the RN8400GH is the high back, same price.
Choose your base, splashback and finish
Pick the base, then the low back (L) or high back (H), then the finish. The model code and price on this page change to match the base and finish you pick. The code shows the low back. For the high back, the L in the code becomes an H, same price. Prices are for stainless with the low or high back, plus GST.
| Base | Model | Price |
| Bench model | RN8400GL-B | $4,580 |
| Leg stand | RN8400GL-L | $5,280 |
| Cabinet | RN8400GL-C | $5,980 |
| Cabinet with doors | RN8400GL-D | $6,780 |
| Finish | What it is | Codes | Extra |
| Stainless | Standard stainless | none | Included |
| Cue | Enamel control panel | C0 black, C2 chilli red, C3 burgundy | $380 |
| Bold | Enamel control and front panels, cabinet bases only | B0 black, B2 chilli red, B3 burgundy | $580 on the cabinet, $980 on the cabinet with doors |
The burners
Each open burner is rated at 28MJ/hr, with a cast iron cap and a gas valve that runs from high to low with settings in between for finer control. Every burner now has its own pilot and flame failure as standard. With a pilot, you can turn a burner off and light it again straight away, instead of leaving it running or lighting it every time you want it.
The burners lift right out for cleaning or soaking, and they sit snugly on the venturi so they do not seize like the old fixed burners. The cast iron vent top comes off for cleaning too, the valves have surrounds that protect them from cleaning chemicals, and the rounded bullnose has no sharp corners to catch grime. The potstands are enamelled cast iron and the spill trays underneath are enamelled. All parts are reached from the front for service.
Read more about what changed in our Waldorf Continuum gas cooktops post.
Which 600mm Waldorf gas cooktop do I need?
All three are 600mm wide with the same bases, finishes and prices. The difference is the top.
| Model | RN8400G | RN8403G | RN8406G |
| Top | 4 open burners | 2 burners, 300mm grill | 600mm grill |
| Total gas | 112MJ/hr | 76MJ/hr | 40MJ/hr |
| From | $4,580 | $4,580 | $4,580 |
Warranty and support
2 years on site parts and labour by Moffat Australia. See our warranty page for the details.
Frequently asked questions
Who makes the Waldorf RN8400G?
Moffat makes the Waldorf RN8400G in New Zealand, and backs it in Australia with 2 years on site parts and labour.
What is the difference between the RN8400GL and the RN8400GH?
Only the splashback. The RN8400GL has the low back, 415mm high on the bench model and 975mm on a base. The RN8400GH has the high back, 570mm on the bench model and 1130mm on a base. Both are the same price. Just pick the splashback on this page.
What bases can I get the RN8400G on?
Bench model, leg stand, cabinet or cabinet with doors. Just pick the base on this page.
What is the Cue finish?
Cue puts a vitreous enamel finish on the control panel, in black, chilli red or burgundy. It adds $380 plus GST.
What is the Bold finish?
Bold puts a vitreous enamel finish on the control panel and the front panels, in black, chilli red or burgundy. It comes on the cabinet and cabinet with doors only, and adds $580 on the cabinet and $980 on the cabinet with doors, plus GST.
Can I change the splashback or colour later?
Yes. Swapping between the low and high back is a simple change, and the panels can be changed later if you want to upgrade the look.
What do the codes on the end of the model mean?
The letter after the dash is the base: B bench model, L leg stand, C cabinet, D cabinet with doors. C0, C2 and C3 are Cue and B0, B2 and B3 are Bold, where 0 is black, 2 is chilli red and 3 is burgundy. So RN8400GH-C-B2 is the high back on a cabinet with the Bold finish in chilli red. No colour code means stainless.
Does the RN8400G run on natural gas or LPG?
Either. Just let us know which when you order. It comes with the regulator and a conversion kit.
What gas connection does the RN8400G need?
A 3/4 inch BSP male connection at the rear. Your gas fitter connects it.
How much gas does the RN8400G use?
Each open burner is rated at 28MJ/hr, so 112MJ/hr with all four on full.
Does the RN8400G have a pilot and flame failure?
Yes. Every burner has its own pilot and flame failure as standard. With a pilot, you can turn a burner off and light it again straight away, instead of leaving it running or lighting it every time you want it.
Do I need a hood over the RN8400G?
Yes. All gas cooking equipment needs a hood to take away the exhaust gases.
How fine is the burner control?
Each gas valve runs from high to low, with settings in between for finer control.
Can I get the RN8400G with a grill plate?
Yes. The RN8403G has two burners and a 300mm grill plate, and the RN8406G has a full 600mm grill plate. All three are the same price. Any 300mm section can be a grill plate at no extra cost. The grill sits on the right as standard, or on the left if you let us know when you order.
What is the difference between a grill plate and a griddle?
The grill plate on a cooktop is a flat plate over a gas burner, set by a gas valve from high to low. A dedicated griddle has the plate across the whole top, a thicker plate and a thermostat for more precise control.
How do I clean the RN8400G?
The burners lift right out for cleaning or soaking, and the cast iron vent top comes off. The potstands and spill trays are enamelled, so they wipe down and come out for cleaning.
Can I get rollers on the RN8400G?
Yes. Rollers for the rear are available as an extra on the leg stand and cabinet bases. Standard is legs with adjustable feet.
What are the dimensions of the RN8400G?
600mm wide and 818mm deep. With the low back it is 415mm high on the bench model and 975mm on any of the bases. With the high back it is 570mm and 1130mm.
How much does the RN8400G weigh?
80kg.
How much is delivery on the RN8400G?
Delivery is typically $120 plus GST. Use the Freight Cost Guide button on this page for the exact price to your postcode, including whether a tailgate is needed.
Do you ever have scratch and dent RN8400G cooktops?
Sometimes. These are Moffat units with freight damage or ex display stock, subject to availability. Ask us what is on hand.
Contact
Phone or Text: 0412 034948
Email: sales@eattucker.com