Convotherm CXGBD10.10 Gas Combi Oven

The Convotherm CXGBD10.10 is an 11 tray gas boiler combi oven built for kitchens that want straightforward steam, combi and convection cooking without a hardwired electrical connection. It holds 11 x GN 1/1 trays on 68mm spacing and runs on a high performance boiler generating steam outside the cooking chamber for consistent saturation. The easyDial control is a single rotary dial with a digital display and a TriColor status ring, so every function sits on one operating level.

Convotherm combi ovens are manufactured in Germany and distributed in Australia by Moffat, backed by Moffat's Australia wide service and spare parts network. The CXGBD10.10 suits commercial kitchens with gas already on site that want the full 11 tray capacity of the easyTouch range at a simpler control and lower price point. It stores 99 cooking profiles of up to 9 steps each, runs ConvoClean automatic cleaning, and has HACCP data storage built in. If you want Press&Go automatic cooking, WiFi and a disappearing door, the easyTouch range is the step up from here.

Best for: commercial kitchens with gas already on site, wanting simple, reliable steam, combi and convection cooking with a full 11 tray capacity.

Stand

A stainless steel stand is available to suit the CXGBD10.10. Contact us for current pricing.

Stacking

A CXGBD6.10 can be stacked on top of the CXGBD10.10 as the base unit, gas on gas only. Stacking kit pricing is not yet published, contact us for a quote before ordering.

Does the CXGBD10.10 need an electrician to install?

No. The CXGBD10.10 runs on a 10A cordset that plugs straight into a standard 10A outlet for the control electronics, no electrician needed for the electrical side. It does need a gas fitter to connect the R3/4 gas supply, on natural gas or LPG.

How does the steam generation work?

Steam is generated by a high performance boiler outside the cooking chamber, giving guaranteed saturation for steam mode and automatic moisture control in combi-steam mode. Natural Smart Climate (ACS+) manages humidity and airflow through the cook automatically, with Crisp&Tasty, BakePro and HumidityPro extra functions if finer control is needed.

What trays does it take?

The CXGBD10.10 takes 11 x GN 1/1 trays on 68mm spacing, or up to 8 x 600 x 400mm baking sheets with the appropriate rack fitted.

CXGBD10.10 or CXEBD10.10, which one do I need?

Both have the same 11 tray capacity, boiler and easyDial controls. The CXGBD10.10 runs on gas with a simple 10A plug-in for the control electronics, so if gas is already run to your kitchen it is often the cheaper appliance to install and run. The CXEBD10.10 is hardwired on a three phase electrical connection, a better fit if you don't have gas on site. The gas model also needs more ventilation clearance above the unit, so check your hood layout before deciding.

easyDial or easyTouch, what's the difference?

Both ranges run the same boiler, cooking modes and Natural Smart Climate functions. easyDial uses a single rotary dial and digital display with a TriColor status ring, stores 99 cooking profiles, and has a standard hinged door. easyTouch adds a 10 inch capacitive touch screen, Press&Go automatic cooking with up to 399 profiles, WiFi and Ethernet as standard, and a disappearing door. If your kitchen wants the simplest possible control and a lower price point, easyDial covers the same core cooking performance.

Do I need an exhaust hood?

Yes. Combi ovens release steam every time the door opens, so extraction is required regardless of the model. The CXGBD10.10 needs 1000mm clearance above the unit for ventilation, double the clearance of the electric model, so check this against your existing hood layout. Ventilation requirements can vary by council, so check your local regulations if unsure.

• 24 months parts and labour warranty, backed by Moffat's Australia wide service network.
• National 24 hour service hotline with technicians across every state.

For enquiries please contact

Phone or Text: 0412 034948

Email: sales@eattucker.com