Waldorf GP8900G-CB 900mm Gas Griddle

The Waldorf GP8900G-CB is a 900mm commercial gas griddle on a fully enclosed cabinet base, with a thick machined plate and separate left and right heat zones for even, consistent flat-top cooking.

Two 40MJ burners heat an 892mm x 530mm griddle plate 20mm thick, with separate left and right heat zones each on their own 90-300°C thermostat, so you can run one side hotter than the other. The plate is top weld sealed with an overlapping finish front and rear, so there's no lip or trap for grease and food debris to catch in during cleaning. Each burner runs on full pilot and flame failure protection with piezo ignition.

The GP8900G-CB comes on a fully enclosed cabinet base, and takes an optional GN 1/1 four position racking kit across one or two cabinet bays, up to eight 65mm GN 1/1 pans in total. Ribbed or mirror chromed plate options and joining caps are available for multi-unit runs. Waldorf 800 Series is made by Moffat in New Zealand, and comes complete with a gas type conversion kit if you ever need to switch between natural gas and LPG.

Best for: kitchens that want enclosed under-bench storage built into a wider 900mm griddle footprint, rather than an open leg stand.

What's the difference between a Grill top and a griddle?

Grill top, or most commonly called a grill plate, is the most common type of flat grill in use. It's the option on our gas stoves and cooktops, with a thinner plate around 12mm, a single burner per 300mm section, and a simple valve instead of a thermostat, so it's either on high or low. The plate's removable for cleaning, which leaves a gap front and back that caustic cleaning fluid can work into over time and corrode. Grease is caught in a shallow tray per 300mm section.

The GP8900G-CB is a griddle, a different piece of equipment entirely. The plate is much thicker at 20mm, thermostatically controlled from 90-300°C rather than just high or low, and welded in as a sealed, non-removable unit with no gap for anything to get into. Grease drains into one deep tray under the whole plate instead of several shallow ones per section.

Can I fit shelving inside the GP8900G-CB cabinet?

Yes. It takes an optional GN 1/1 four position racking kit, available across one or two cabinet bays for up to eight 65mm GN 1/1 pans of storage.

Does the GP8900G range come on other bases besides cabinet?

Yes. This GP8900G-CB is the cabinet base version specifically. The GP8900G-B comes on bench legs, the GP8900G-LS comes on an open leg stand, and the GP8900G-RB comes on a refrigerated base with two GN 1/1 drawers underneath.

What gas type does the GP8900G-CB run on?

Either natural gas or LPG, just let us know which when you order. Connection is a ¾″ BSP male gas inlet, so a licensed gas fitter makes the connection.

Warranty

• 2 year warranty, backed by Moffat's Australian service network

Phone or Text: 0412 034948
sales@eattucker.com