Turbofan G32D4/2 Double Stacked Digital Gas Convection Oven

The Turbofan G32D4/2 gives you two full size gas convection ovens with digital controls, stacked on one stainless steel stand, doubling your oven capacity without doubling your floor space.

Each oven runs on a 35MJ/hr infrared burner with electronic ignition, and a bi-directional fan to move heat evenly through the vitreous enamel chamber, with dual halogen lamps so you can see inside while it's running. The electronic thermostat runs 50 to 260°C, and the timer either counts down from up to 180 minutes or counts up to 999 minutes for holding and slow cooking. Each oven also plugs in on its own 13A cordset for the digital controls and fan, so you'll need two power points, not one.

Like all Moffat gas equipment except fryers, a gas regulator is supplied with the G32D4/2, but it is not pre-fitted, your licensed gas fitter fits it as part of installation. It's available in natural gas or LPG, just let us know which when you order. Either way it comes with a conversion kit for the other gas type.

Each oven has its own digital display, with individual time and temperature knobs, so they run completely independently. You can work in manual mode or step through one of 20 stored programs with up to 3 cooking stages and stage end alarms. Moisture injection runs at 5 levels, either automatically in program mode or manually on demand. An optional core temperature probe kit is available if you'd rather cook to an internal temperature than a set time. The door is side hinged, set up for left hand opening as standard, though it can be field converted to right hand.

The G32D4/2 doesn't arrive already stacked. It ships as two individual G32D4 ovens plus a stacking kit that goes together on site, using adjustable feet on this model. If you'd rather have it on castors instead, the G32D4/2C uses the same two ovens with a castor stacking kit.

Like the rest of our Moffat range, the G32D4/2 is made in New Zealand.

Does the G32D4/2 arrive already stacked?

No. It comes as two separate G32D4 ovens plus a stacking kit, and goes together on site.

Is the gas regulator included?

Yes, but it's supplied loose, not pre-fitted. Your licensed gas fitter fits it as part of installation, same as all our Moffat gas equipment except fryers.

Do I need to connect water to use this oven?

No. The 3/4 inch connection is only for the moisture injection function. Most people never connect it and run the oven as a standard convection oven.

What's the difference between the G32D4/2 and G32D4/2C?

The /2 uses an adjustable feet base stand. The /2C uses a castor base stand instead, if you'd rather move it around. Both use the same two ovens.

Warranty

• 2 year warranty

Phone or Text: 0412 034948
sales@eattucker.com