Friginox MX1LSTS7-C 1 Trolley Roll-in Blast Chiller

Specifications from the Moffat Australia Friginox price list.

The Friginox MX1LSTS7-C is a roll-in blast chiller that takes 1 x 1/1 GN trolley. It chills 80kg per cycle, runs off a 7 inch touch screen with a 3 point core probe, 40 programs and a USB HACCP recorder, and needs a 20A 240V single phase supply. It is the remote condensing unit version, so the condensing unit is supplied and installed separately. Made by Friginox in France, distributed and serviced in Australia by Moffat.

Best for: Production kitchens, caterers and cook chill operations moving 1 trolley of product at a time.

MX1LSTS7-C overview

This 1 trolley roll-in is 1080mm wide with a deeper 790mm inside. Passthrough access is an option, so you can load from the kitchen side and unload on the other. The MX1LSTS7-CF is the chill and freeze version of the same unit.

How the MX1LSTS7-C chills

Pick from soft chill, hard chill and self adaptive intelligent chilling, and run each cycle on the 3 point core probe or on the timer. A pre-chill key gets the cabinet cold before you load, and at the end of every cycle it drops into hold mode on its own. Thawing and defrosting run with the door closed. Manual defrost has automatic time control.

Installation

This is the remote condensing unit version. The condensing unit is not included, so your refrigeration contractor supplies and installs it and runs the lines. It comes with a 20mm insulated stainless steel floor and ramp, expansion and solenoid valves, drip tray and piping. Assembly is required on site. Refrigerant is R452A, and other gas types are available on request.

Which Friginox model do I need?

The roll-ins all run off the same 7 inch touch screen with a 3 point core probe. The difference is trolley count, inside room, capacity and power.

Simple to use

The 7 inch touch screen has large keys that make it easy to use. Save up to 40 programs, and the favourites key gives shortcuts to the last 9 used. Extra functions cover ice cream hardening, ventilated drying, multiple timers with customisable phases and raw fish sanitation. It also has a USB HACCP recorder.

Options

Friginox offers extra core probes, up to 3 in total, passthrough access and an auxiliary stop control panel for the passthrough version. These are factory options, so just let us know which you want when you order.

Warranty and support

2 years on site parts and labour by Moffat Australia nationwide. See our warranty page for the details.

Frequently asked questions

Who makes the Friginox MX1LSTS7-C?
Friginox makes it in France. Moffat distributes it in Australia and looks after warranty and service.

What is the difference between the MX1LSTS7-C and the MX1LSTS7-CF?
The MX1LSTS7-CF chills and freezes, up to 40kg frozen per cycle. The MX1LSTS7-C is chill only.

Does it come with a trolley?
No. The trolley is not included. It takes 1 x 1/1 GN trolley, with 650mm x 790mm inside and 1885mm of height.

Does it include the condensing unit?
No. This is the remote condensing unit version. The condensing unit is supplied and installed by your refrigeration contractor.

Can I get passthrough access?
Yes, passthrough access is a factory option. Inside depth goes from 790mm to 820mm on the passthrough version. Various door opening layouts are available, just let us know which when you order.

What power does it need?
A 20A 240V single phase supply. It draws 2.7kW.

How much can the MX1LSTS7-C chill?
Up to 80kg chilled per cycle. Real loads vary with the food, how thick it is and the container it sits in.

How much is delivery on the MX1LSTS7-C?
Delivery is typically $120 plus GST. Use the Freight Cost Guide button on this page for the exact price to your postcode, including whether a tailgate is needed.

Do you sell scratch and dent units?
Sometimes. These are Moffat units with freight damage or ex-display, subject to availability. Ask us if one is going.

Contact

Phone or Text: 0412 034948
Email: sales@eattucker.com