Friginox EF-C-MX3TS7-C 240kg Blast Chiller Refrigeration System

Specifications from the Moffat Australia Friginox price list.

The Friginox EF-C-MX3TS7-C is a blast chiller refrigeration system for a cool room built on site. It is rated to chill 240kg per cycle, matching the Friginox MX3 roll-in models, and runs off a 7 inch touch screen with a multi point core probe and 40 programs. It needs a 20A 400V three phase supply. Made by Friginox in France, distributed and serviced in Australia by Moffat.

Best for: Large production kitchens and cook chill operations building their own blast room to suit the space.

EF-C-MX3TS7-C overview

The system comes with the control panel, electrical box, evaporator, air deflector, expansion and solenoid valves, drip tray and piping. The room panels are supplied by your contractor, and Friginox recommends an inside room size of 900mm wide, 1120mm deep and 1885mm high. The EF-C-MX3TS7-CF is the chill and freeze version.

How the EF-C-MX3TS7-C chills

Pick from soft chill, hard chill and self adaptive intelligent chilling, and run each cycle on the multi point core probe or on the timer. A pre-chill key gets the room cold before you load, and at the end of every cycle it drops into hold mode on its own. Manual defrost has automatic time control.

Installation

The remote condensing unit is not included, and the room panels are supplied by your contractor. The evaporator fixes to a vertical wall of injected polyurethane isothermal panels. If you are using another panel type, let us know so the right fittings come with it. Assembly is required on site. Refrigerant is R452A, and other gas types are available on request.

Which Friginox model do I need?

All four systems run the same touch screen and multi point probe. The difference is capacity, room size and power.

Simple to use

The 7 inch touch screen has large keys that make it easy to use. Save up to 40 programs, and the favourites key gives shortcuts to the last 9 used. Extra functions cover ice cream hardening, ventilated drying, multiple timers with customisable phases and raw fish sanitation.

Options

Friginox offers a USB connection, extra core probes, up to 3 in total, a door opening detection sensor and an auxiliary stop control for a double access passthrough room. These are factory options, so just let us know which you want when you order.

Warranty and support

2 years on site parts and labour by Moffat Australia nationwide. See our warranty page for the details.

Frequently asked questions

Who makes the Friginox EF-C-MX3TS7-C?
Friginox makes it in France. Moffat distributes it in Australia and looks after warranty and service.

What is the difference between the EF-C-MX3TS7-C and the EF-C-MX3TS7-CF?
The EF-C-MX3TS7-CF chills and freezes, up to 110kg frozen per cycle. The EF-C-MX3TS7-C is chill only.

What comes with the system?
The control panel, electrical box, evaporator, air deflector, expansion and solenoid valves, drip tray and piping. The remote condensing unit and room panels are not included.

What size room does it need?
Friginox recommends an inside room size of 900mm wide, 1120mm deep and 1885mm high.

What power does it need?
A three phase 400V supply rated at 20A. It draws 6.8kW. Get your electrician to check your board has three phase before you order.

How much can the EF-C-MX3TS7-C chill?
Up to 240kg chilled per cycle. Real loads vary with the food, how thick it is and the container it sits in.

How much is delivery on the EF-C-MX3TS7-C?
Delivery is typically $120 plus GST. Use the Freight Cost Guide button on this page for the exact price to your postcode, including whether a tailgate is needed.

Do you sell scratch and dent units?
Sometimes. These are Moffat units with freight damage or ex-display, subject to availability. Ask us if one is going.

Contact

Phone or Text: 0412 034948
Email: sales@eattucker.com