Product Overview
| Model | C6D-B or C6D |
| Product | Gas cooktop |
| Burners | 4 open burners, 22MJ/hr each |
| Total gas | 88MJ/hr (22kW) |
| Gas type | Natural gas or LPG |
| Gas connection | 3/4 inch BSP male |
| Regulator | Supplied, fitted by your gas fitter |
| Flame failure | Standard on open burners |
| Pilot | Optional, $760 |
| Hood | Required |
| Width | 600mm |
| Depth | 800mm |
| Height | 485mm bench model, 1085mm on the cabinet |
| Base | Bench model or open cabinet |
| Finish | Stainless |
| Weight | 52.5kg bench, 68kg cabinet |
| Made by | Moffat |
| Made in | New Zealand |
| Warranty | 2 years on site |
The Cobra C6D is a 600mm commercial gas cooktop with four 22MJ/hr open burners, 88MJ/hr in total. Flame failure is standard on the open burners. It runs on natural gas or LPG and comes as a bench model from $2,480 plus GST, or on an open cabinet for $2,980 plus GST. Made in New Zealand by Moffat, with 2 years on site parts and labour.
Best for: a kitchen on a budget that needs plenty of burners for pots and pans.
C6D overview
Cobra is the lower cost Moffat line, with a simple layout and cast iron burners. The other 600mm Cobra tops are the C6C (2 burners, 300mm grill) and the C6B (600mm grill), all at the same price. For bigger 28MJ/hr burners and more base options, look at the Blue Seal G514D. For a pilot on every burner as standard, the Waldorf RN8400G.
Choose your base
Pick the base. The model code and price on this page change to match. Prices are plus GST.
| Base | Model | Price |
| Bench model | C6D-B | $2,480 |
| Open cabinet base | C6D | $2,980 |
The bench model sits on 63mm adjustable feet. The open cabinet has a stainless base inside, adjustable front feet and two rollers at the rear so you can pull it out to clean.
The burners
Each open burner is rated at 22MJ/hr, with cast iron burner heads and enamelled cast iron caps. The gas valves run from high to low with settings in between. Flame failure is standard. A pilot with flame failure on the open burners is available as an extra for $760 plus GST. Just pick it on this page.
The potstands and control panel are vitreous enamel, with a stainless front, sides and splashback. The spill trays come out for cleaning and all parts are reached from the front for service.
Which 600mm Cobra gas cooktop do I need?
All three are 600mm wide at the same price. The difference is the top.
| Model | C6D | C6C | C6B |
| Top | 4 open burners | 2 burners, 300mm grill | 600mm grill |
| Total gas | 88MJ/hr | 64MJ/hr | 40MJ/hr |
| From | $2,480 | $2,480 | $2,480 |
Warranty and support
2 years on site parts and labour by Moffat Australia. See our warranty page for the details.
Frequently asked questions
Who makes the Cobra C6D?
Moffat makes the Cobra C6D in New Zealand, and backs it in Australia with 2 years on site parts and labour.
What is the difference between the C6D-B and the C6D?
Same cooktop. The C6D-B is the bench model, $2,480 plus GST, and sits on a bench on adjustable feet. The C6D comes on an open stainless cabinet for storage underneath, $2,980 plus GST, with adjustable front feet and two rollers at the rear so you can pull it out to clean behind.
Can I get the C6D with a different top?
Yes. The other 600mm Cobra tops are the C6C (2 burners, 300mm grill) and the C6B (600mm grill), all at the same price.
Does the C6D have a pilot?
Not as standard. The open burners have flame failure, so you light the burner each time you use it. A pilot with flame failure on the open burners is available as an extra for $760 plus GST, $380 for each 300mm section. Just pick it on this page. The Waldorf RN8400G has a pilot on every burner as standard.
How fine is the burner control?
Each gas valve runs from high to low, with settings in between.
Does the C6D run on natural gas or LPG?
Either. Just let us know which when you order.
What gas connection does the C6D need?
A 3/4 inch BSP male connection at the rear. The regulator comes with it and your gas fitter fits it.
How much gas does the C6D use?
Each open burner is rated at 22MJ/hr, so 88MJ/hr (22kW) with everything on full.
Do I need a hood over the C6D?
Yes. All gas cooking equipment needs a hood to take away the exhaust gases.
How do I clean the C6D?
The burner caps lift off and the burners come out, and the potstands and spill trays lift out to wipe down. All the parts are reached from the front for service.
What is the difference between Cobra, Blue Seal and Waldorf?
All three are made by Moffat in New Zealand. Cobra is the lower cost line, on a bench model or open cabinet. The Blue Seal G514D adds bigger 28MJ/hr burners and more base options. The Waldorf RN8400G adds a pilot on every burner and colour options.
What are the dimensions of the C6D?
600mm wide and 800mm deep. The bench model is 485mm high to the top of the splashback, and 1085mm on the cabinet.
How much does the C6D weigh?
52.5kg as the bench model and 68kg on the cabinet.
How much is delivery on the C6D?
Delivery is typically $120 plus GST. Use the Freight Cost Guide button on this page for the exact price to your postcode, including whether a tailgate is needed.
Do you ever have scratch and dent C6D cooktops?
Sometimes. These are Moffat units with freight damage or ex display stock, subject to availability. Ask us what is on hand.
Contact
Phone or Text: 0412 034948
Email: sales@eattucker.com