Product Overview
| Model | IN8200LR2-L |
| Product | Induction cooktop |
| Zones | 2 round zones |
| Zone size | 300mm each |
| Power | 5kW 3ph (2.5kW per zone) |
| Supply | 415V, 8A per phase |
| Controls | Knob per zone, infinitely variable |
| Surface | 6mm ceramic glass |
| Width | 450mm |
| Depth | 818mm |
| Height bench | 415mm low back, 570mm high back |
| Height on base | 975mm low back, 1130mm high back |
| Splashback | Low (L) or high (H) |
| Finish | Stainless, Cue or Bold |
| Weight | 88kg |
| Hood | Recommended |
| Made by | Moffat |
| Made in | New Zealand |
| Warranty | 2 years on site |
The Waldorf IN8200LR2 is a 450mm induction cooktop with two 2.5kW round zones, 300mm each, on 6mm ceramic glass. It runs on 415V three phase at 8A per phase, 5kW in total, so a hood is recommended but not essential. It comes on a bench model, leg stand, cabinet or cabinet with doors, with a low or high back, in stainless or with a Cue or Bold enamel finish. Made in New Zealand by Moffat, with 2 years on site parts and labour.
Best for: sauces, holding and smaller pans, a kitchen with limited three phase capacity, or anywhere a hood is hard to fit.
IN8200LR2 overview
The IN8200LR2 is the two zone 2.5kW round model in the 450mm Waldorf induction cooktop line up. Other 450mm options include the IN8100LF (1 full area, 5kW), the IN8100LR5 (1 round, 5kW) or the IN8100LR3 (1 round, 3.5kW). The IN8200LR2 is the low back model and the IN8200HR2 is the high back, same price.
Choose your base, splashback and finish
Pick the base, then the low back (L) or high back (H), then the finish. The model code and price on this page change to match the base and finish you pick. The code shows the low back. For the high back, the L in the code becomes an H, same price. Prices are for stainless with the low or high back, plus GST.
| Base | Model | Price |
| Bench model | IN8200LR2-B | $8,180 |
| Leg stand | IN8200LR2-L | $9,480 |
| Cabinet | IN8200LR2-C | $9,980 |
| Cabinet with doors | IN8200LR2-D | $10,280 |
| Finish | What it is | Codes | Extra |
| Stainless | Standard stainless | none | Included |
| Cue | Enamel control panel | C0 black, C2 chilli red, C3 burgundy | $280 |
| Bold | Enamel control and front panels, cabinet bases only | B0 black, B2 chilli red, B3 burgundy | $480 on the cabinet, $780 on the cabinet with doors |
How induction cooks
Induction turns power into a high frequency field that heats the base of the pan directly. The glass is not the heat source, so very little heat is lost into the kitchen and the cooktop reacts straight away to the knob. Lift a pan off and that zone switches off by itself. There is no flame and no gas fumes, so the kitchen stays cooler and cleaner.
Which 450mm Waldorf induction cooktop do I need?
All seven are 450mm wide with the same choice of bases. The difference is the zones, the power and whether a hood is required.
| Model | IN8100LF | IN8100LR5 | IN8100LR3 | IN8200LF | IN8200LR5 | IN8200LR3 | IN8200LR2 |
| Zones | 1 full area | 1 round | 1 round | 2 full area | 2 round | 2 round | 2 round |
| Power | 5kW | 5kW | 3.5kW | 10kW | 10kW | 7kW | 5kW |
| From | $10,280 | $10,980 | $10,280 | $11,680 | $11,280 | $10,780 | $8,180 |
Simple to use
One large knob per zone with infinitely variable power. A green light shows a zone is heating and a pan is detected, and a second green light shows an error. The cooking surface is fully sealed, the stainless air intake filters pull out for cleaning, and service access is from the front.
Warranty and support
2 years on site parts and labour by Moffat Australia. See our warranty page for the details.
Frequently asked questions
Who makes the Waldorf IN8200LR2?
Moffat makes the Waldorf IN8200LR2 in New Zealand, and backs it in Australia with 2 years on site parts and labour.
What is the difference between the IN8200LR2 and the IN8200HR2?
Only the splashback. The IN8200LR2 has the low back, 415mm high on the bench model and 975mm on a base. The IN8200HR2 has the high back, 570mm on the bench model and 1130mm on a base. Both are the same price. Just pick the splashback on this page.
What bases can I get the IN8200LR2 on?
Bench model, leg stand, cabinet or cabinet with doors. Just pick the base on this page.
What is the Cue finish?
Cue puts a vitreous enamel finish on the control panel, in black, chilli red or burgundy. It adds $280 plus GST.
What is the Bold finish?
Bold puts a vitreous enamel finish on the control panel and the front panels, in black, chilli red or burgundy. It comes on the cabinet or cabinet with doors only, and adds $480 on the cabinet, and $780 on the cabinet with doors, plus GST.
Can I change the splashback or colour later?
Yes. Swapping between the low and high back is a simple change, and the panels can be changed later if you want to upgrade the look.
What do the codes on the end of the model mean?
The letter after the dash is the base: B bench model, L leg stand, C cabinet, D cabinet with doors. C0, C2 and C3 are Cue and B0, B2 and B3 are Bold, where 0 is black, 2 is chilli red and 3 is burgundy. So IN8200HR2-C-B2 is the high back on a cabinet with the Bold finish in chilli red. No colour code means stainless.
What pans can I use on the IN8200LR2?
Most pans work.
Do I need a hood over the IN8200LR2?
No. At 5kW it is under the 8kW where a hood is required. A hood is still recommended to take away smells and steam, but it is not essential.
What power supply does the IN8200LR2 need?
415V three phase, 5kW, 8A per phase. Your electrician connects it.
Can I run both zones at once on the IN8200LR2?
Yes. Each zone has its own knob, so you can have two pans going at different heats.
Is there a single phase version of the IN8200LR2?
No. On single phase, the single zone IN8100LR3 has one 3.5kW round zone on 240V.
How big are the zones on the IN8200LR2?
Each R2 zone is 300mm wide and 2.5kW. They are smaller and less powerful than the 3.5kW and 5kW zones, which is how six fit on a 900mm top.
Is induction as powerful as gas?
Induction puts the heat straight into the pan instead of heating the air around it, so very little is lost into the kitchen. It heats a pan fast, and the knob gives instant control up and down.
What happens if I lift the pan off?
Automatic pan detection switches that zone off, and the heat stops straight away.
How do I clean the IN8200LR2?
Wipe down the sealed glass. Spills do not bake on like they do on a solid top, because the glass is not the heat source. The stainless air intake filters pull out for cleaning.
Will the glass crack?
The cooking surface is 6mm ceramic glass, made to take the heat of commercial cooking. Like any glass, a hard knock can damage it, so do not drop pans on it.
Does induction make the kitchen cooler?
Yes. There is no flame, so far less heat goes into the room, and there are no gas fumes like nitrogen dioxide or carbon monoxide.
Can I get rollers on the IN8200LR2?
Yes. Rollers for the rear are available as an extra on the leg stand and cabinet bases. Standard is legs with adjustable feet.
What are the dimensions of the IN8200LR2?
450mm wide and 818mm deep. With the low back it is 415mm high on the bench model and 975mm on any of the bases. With the high back it is 570mm and 1130mm.
How much does the IN8200LR2 weigh?
88kg.
How much is delivery on the IN8200LR2?
Delivery is typically $120 plus GST. Use the Freight Cost Guide button on this page for the exact price to your postcode, including whether a tailgate is needed.
Do you ever have scratch and dent IN8200LR2 cooktops?
Sometimes. These are Moffat units with freight damage or ex display stock, subject to availability. Ask us what is on hand.
Contact
Phone or Text: 0412 034948
Email: sales@eattucker.com