Product Overview
| Model | RS2G RS1 SCA INX |
| Product | Commercial espresso machine |
| Groups | 2 |
| Boiler | 11 litres, copper |
| Controls | 4.3 inch touchscreen |
| Steam | Two cool touch wands |
| Hot water | Two programmable buttons |
| Cup height | Up to 120mm |
| Width | 840mm |
| Depth | 600mm |
| Height | 512mm |
| Weight | 95kg |
| Power | 5.6kW 1ph, 240V |
| Plug | 25A cordset |
| Water | Mains cold, 3/8" BSP |
| Drain | 50mm gravity drain |
| Made by | Rancilio |
| Supported by | Moffat |
| Warranty | 2 years parts and labour |
Specifications from the Moffat Australia RS2G RS1 SCA INX spec sheet (PDF download).
The Rancilio RS1 2 Group is Rancilio's specialty commercial espresso machine, with a stainless steel boiler on each group head and advanced temperature profiling, so the barista can control the temperature through the extraction. It has a 4.3 inch touchscreen, a display on each group, pre and post infusion control and an 11 litre insulated copper steam boiler. It runs on a 25A cordset. Made by Rancilio in Italy, distributed and backed in Australia by Moffat with 2 years parts and labour.
Best for: specialty roasters and cafes that dial in single origins and want full control of brew temperature.
RS1 2 Group overview
The RS1 2 Group is the top of Rancilio's Specialty range. Where the Invicta 2 Group runs a heat exchanger, the RS1 has a stainless steel boiler on each group head for temperature stability, and advanced temperature profiling so the brew temperature can change through the shot. The three group is the RS1 3 Group.
Temperature profiling
Each group head has its own stainless steel boiler. Advanced temperature profiling gives the barista dynamic control of the brew temperature through the extraction, to get the most out of each blend or single origin. Pre and post infusion control the water pressure through the shot. Four magnetic flow meters keep volumetric doses accurate. The steam boiler is a fully insulated copper boiler that saves up to 20% energy in standby, with ABM advanced boiler management for steam pressure and recovery, and a programmable timer to drain and renew its water daily.
Built for the barista
The 4.3 inch touchscreen runs the machine and each group has its own display showing shot time and brew temperature. Backlit keypads give 4 programmable drink doses plus purge or free flow. The variable steam levers have a purge position and two programmable pressure settings for different jugs and milks, and the cool touch wands are easy to move around. Two hot water buttons are each set for dose and temperature, and X-Tea sets tea water. Barista LED lighting lights the extraction and drip tray, the drip tray adjusts from 80 to 120mm, and two USB ports move settings and charge a phone or scales. The weight balanced portafilters sit flat for an even tamp.
Make it yours
All the stainless steel body panels on the RS1 come off, so they can be customised, powder coated or branded. The portafilter handles and steam lever grips can be changed to wood or other materials. Ask us about colour options.
Which Rancilio Specialty machine do I need?
Both the Invicta and the RS1 have the 4.3 inch touchscreen, pre and post infusion and an insulated steam boiler. The RS1 adds a boiler on each group with temperature profiling.
| Model | Groups | Brew system | Steam boiler | Width | Height | Weight | Plug |
| Invicta 2 Group | 2 | Heat exchanger | 11L | 817mm | 450mm | 75kg | 25A |
| Invicta 3 Group | 3 | Heat exchanger | 16L | 1057mm | 450mm | 90kg | 32A |
| RS1 2 Group | 2 | Group head boilers | 11L | 840mm | 512mm | 95kg | 25A |
| RS1 3 Group | 3 | Group head boilers | 16L | 1080mm | 512mm | 110kg | 32A |
Grinder and water filter
Pair it with an on demand grinder. The Kryo 65 OD and Kryo Elite 65 OD suit every Classe and Specialty machine. The Bond grinds by weight and talks to the machine through a cable. A water filter protects the boiler, see our Ultro filter and Ultro Twin.
Warranty and support
2 years parts and labour by Moffat. Moffat has service technicians right across Australia. See all coffee machines or read our warranty page.
Frequently asked questions
Who makes the RS1 2 Group?
Rancilio makes it in Italy. Rancilio has built espresso machines since 1927. Moffat distributes it in Australia and backs it with 2 years parts and labour.
What power does the RS1 2 Group need?
240V single phase at 5.6kW, on a 25A cordset. Your electrician fits a matching 25A outlet on its own circuit.
What water and drain does it need?
A mains cold water supply with a 3/8 inch BSP connection and an open gravity drain of at least 50mm within 100mm of the machine. Rancilio wants water hardness held at 2 to 3 grains per gallon at all times, so fit a water filter. Your plumber connects the water and drain.
Do I need a water filter?
Yes, we recommend one. Hard or chlorinated water scales the boiler and spoils the taste. Rancilio sets water limits (TDS under 135 ppm, total hardness 50 to 100 ppm, pH 6.5 to 8.5). Allow 609 x 127mm for an in-line filter behind the machine or under the bench. See the Ultro and Bestprotect filters in our coffee range.
How much space does the RS1 2 Group need?
It is 840mm wide, 600mm deep and 512mm high. Allow 152mm clear on all sides and keep the water, drain and power within 1m of the machine.
How tall a cup will fit?
Up to 120mm, with the drip tray adjustable from 80 to 120mm.
What comes with the RS1 2 Group?
Group handles and a rubber blind filter cleaning disc. Ask us for the full list of handles and baskets for this model. Genuine cleaning products are sold separately.
What is the difference between the RS1 and the Invicta?
The RS1 has a stainless steel boiler on each group head with advanced temperature profiling, so the brew temperature can change through the shot. The Invicta is a single boiler machine with Steady Brew heat exchanger technology and a 450mm low profile.
Does it clean itself?
The automated cleaning programme (Easy Clean) runs the group head clean for you. Use genuine Rancilio cleaning tablets or powder. The stainless steel drip tray is dishwasher safe.
How much does the RS1 2 Group weigh?
95kg.
How much is delivery on the RS1 2 Group?
Delivery is typically $120 plus GST. Use the Freight Cost Guide button on this page for the exact price to your postcode, including whether a tailgate is needed.
Do you ever have scratch and dent machines?
Sometimes. These are Moffat units with freight damage or ex display stock, subject to availability. Ask us what is on hand.
Contact
Phone or Text: 0412 034948
Email: sales@eattucker.com