Product Overview
| Model | C9C-B or C9C |
| Product | Gas cooktop |
| Burners | 4 open burners, 22MJ/hr each |
| Grill plate | 300mm, right side |
| Grill burner | 20MJ/hr |
| Total gas | 108MJ/hr (30kW) |
| Gas type | Natural gas or LPG |
| Gas connection | 3/4 inch BSP male |
| Regulator | Supplied, fitted by your gas fitter |
| Flame failure | Standard on open burners |
| Pilot | Optional, $760 |
| Grill ignition | Pilot, flame failure, piezo |
| Hood | Required |
| Width | 900mm |
| Depth | 800mm |
| Height | 485mm bench model, 1085mm on the cabinet |
| Base | Bench model or open cabinet |
| Finish | Stainless |
| Weight | 67.5kg bench, 85.5kg cabinet |
| Made by | Moffat |
| Made in | New Zealand |
| Warranty | 2 years on site |
The Cobra C9C is a 900mm commercial gas cooktop with four 22MJ/hr open burners and a 300mm grill plate on the right, 108MJ/hr in total. Flame failure is standard on the open burners, and the grill burner has a pilot, flame failure and piezo ignition. It runs on natural gas or LPG and comes as a bench model from $3,180 plus GST, or on an open cabinet for $3,780 plus GST. Made in New Zealand by Moffat, with 2 years on site parts and labour.
Best for: a busy line on a budget that wants burners plus a grill for eggs, bacon and burgers.
C9C overview
Cobra is the lower cost Moffat line, with a simple layout and cast iron burners. The other 900mm Cobra tops are the C9D (6 open burners), the C9B (2 burners, 600mm grill) and the C9A (900mm grill), all at the same price. For bigger 28MJ/hr burners and more base options, look at the Blue Seal G516C. For a pilot on every burner as standard, the Waldorf RN8603G.
Choose your base
Pick the base. The model code and price on this page change to match. Prices are plus GST.
| Base | Model | Price |
| Bench model | C9C-B | $3,180 |
| Open cabinet base | C9C | $3,780 |
The bench model sits on 63mm adjustable feet. The open cabinet has a stainless base inside, adjustable front feet and two rollers at the rear so you can pull it out to clean.
The burners and grill plate
Each open burner is rated at 22MJ/hr, with cast iron burner heads and enamelled cast iron caps. The gas valves run from high to low with settings in between. Flame failure is standard. A pilot with flame failure on the open burners is available as an extra for $760 plus GST. Just pick it on this page.
The grill plate is 12mm mild steel with a machined finish, over one 20MJ/hr burner, set by a gas valve from high to low. The grill burner has a pilot, flame failure and piezo ignition as standard. A stainless grease tray sits under the plate.
The potstands and control panel are vitreous enamel, with a stainless front, sides and splashback. The spill trays come out for cleaning and all parts are reached from the front for service.
Which 900mm Cobra gas cooktop do I need?
All four are 900mm wide at the same price. The difference is the top.
| Model | C9D | C9C | C9B | C9A |
| Top | 6 open burners | 4 burners, 300mm grill | 2 burners, 600mm grill | 900mm grill |
| Total gas | 132MJ/hr | 108MJ/hr | 84MJ/hr | 60MJ/hr |
| From | $3,180 | $3,180 | $3,180 | $3,180 |
Warranty and support
2 years on site parts and labour by Moffat Australia. See our warranty page for the details.
Frequently asked questions
Who makes the Cobra C9C?
Moffat makes the Cobra C9C in New Zealand, and backs it in Australia with 2 years on site parts and labour.
What is the difference between the C9C-B and the C9C?
Same cooktop. The C9C-B is the bench model, $3,180 plus GST, and sits on a bench on adjustable feet. The C9C comes on an open stainless cabinet for storage underneath, $3,780 plus GST, with adjustable front feet and two rollers at the rear so you can pull it out to clean behind.
What is the grill plate on the C9C?
The grill plate is 12mm mild steel with a machined finish, over one 20MJ/hr burner, set by a gas valve from high to low. The grill burner has a pilot, flame failure and piezo ignition as standard. A stainless grease tray sits under the plate.
Is it a grill plate or a griddle?
Cobra calls it a griddle plate. It is the flat plate that drops onto a cooktop, set by a gas valve from high to low. A dedicated griddle is different: the plate covers the whole top, it is thicker and has a thermostat for more precise control.
Can I get the grill on the left?
No. On the Cobra the grill plate only comes on the right side.
Can I get the C9C with a different top?
Yes. The other 900mm Cobra tops are the C9D (6 open burners), the C9B (2 burners, 600mm grill) and the C9A (900mm grill), all at the same price.
Does the C9C have a pilot?
Not as standard. The open burners have flame failure, so you light the burner each time you use it. A pilot with flame failure on the open burners is available as an extra for $760 plus GST, $380 for each 300mm section. Just pick it on this page. The Waldorf RN8603G has a pilot on every burner as standard.
How fine is the burner control?
Each gas valve runs from high to low, with settings in between.
Does the C9C run on natural gas or LPG?
Either. Just let us know which when you order.
What gas connection does the C9C need?
A 3/4 inch BSP male connection at the rear. The regulator comes with it and your gas fitter fits it.
How much gas does the C9C use?
Each open burner is rated at 22MJ/hr and the grill burner at 20MJ/hr, so 108MJ/hr (30kW) with everything on full.
Do I need a hood over the C9C?
Yes. All gas cooking equipment needs a hood to take away the exhaust gases.
How do I clean the C9C?
The burner caps lift off and the burners come out, and the potstands and spill trays lift out to wipe down. Scrape the grill plate down while it is warm and empty the grease tray. All the parts are reached from the front for service.
What is the difference between Cobra, Blue Seal and Waldorf?
All three are made by Moffat in New Zealand. Cobra is the lower cost line, on a bench model or open cabinet. The Blue Seal G516C adds bigger 28MJ/hr burners and more base options. The Waldorf RN8603G adds a pilot on every burner and colour options.
What are the dimensions of the C9C?
900mm wide and 800mm deep. The bench model is 485mm high to the top of the splashback, and 1085mm on the cabinet.
How much does the C9C weigh?
67.5kg as the bench model and 85.5kg on the cabinet.
How much is delivery on the C9C?
Delivery is typically $120 plus GST. Use the Freight Cost Guide button on this page for the exact price to your postcode, including whether a tailgate is needed.
Do you ever have scratch and dent C9C cooktops?
Sometimes. These are Moffat units with freight damage or ex display stock, subject to availability. Ask us what is on hand.
Contact
Phone or Text: 0412 034948
Email: sales@eattucker.com