Cobra C3D-B 300mm Two Burner Gas Cooktop

Price: $1,980.00 plus GST
$2,178.00 inc GST
SKU:
C3D-B
Weight:
32.00 KGS

Product Overview

ModelC3D-B
ProductGas cooktop
Burners2 open burners, 22MJ/hr each
Total gas44MJ/hr (11kW)
Gas typeNatural gas or LPG
Gas connection3/4 inch BSP male
RegulatorSupplied, fitted by your gas fitter
Flame failureStandard on open burners
PilotOptional, $380
HoodRequired
Width305mm
Depth800mm
Height485mm
BaseBench model
FinishStainless
Weight32kg
Made byMoffat
Made inNew Zealand
Warranty2 years on site

The Cobra C3D is a 305mm commercial gas cooktop with two 22MJ/hr open burners, 44MJ/hr in total. Flame failure is standard on the open burners. It runs on natural gas or LPG and comes as a bench model for $1,980 plus GST. Made in New Zealand by Moffat, with 2 years on site parts and labour.

Best for: adding two burners next to a fryer or chargrill, a small cafe, or a food truck.

C3D overview

Cobra is the lower cost Moffat line, with a simple layout and cast iron burners. The other 300mm Cobra top is the C3C (300mm grill), all at the same price. For bigger 28MJ/hr burners and more base options, look at the Blue Seal G512D. For a pilot on every burner as standard, the Waldorf RN8200G.

The burners

Each open burner is rated at 22MJ/hr, with cast iron burner heads and enamelled cast iron caps. The gas valves run from high to low with settings in between. Flame failure is standard. A pilot with flame failure on the open burners is available as an extra for $380 plus GST. Just pick it on this page.

The potstands and control panel are vitreous enamel, with a stainless front, sides and splashback. The spill trays come out for cleaning and all parts are reached from the front for service.

Which 300mm Cobra gas cooktop do I need?

All two are 305mm wide at the same price. The difference is the top.

ModelC3DC3C
Top2 open burners300mm grill
Total gas44MJ/hr20MJ/hr
From$1,980$1,980

Warranty and support

2 years on site parts and labour by Moffat Australia. See our warranty page for the details.

Frequently asked questions

Who makes the Cobra C3D?
Moffat makes the Cobra C3D in New Zealand, and backs it in Australia with 2 years on site parts and labour.

Does the C3D-B come on a cabinet?
No. The 300mm Cobra is a bench model only, on adjustable feet. If you want a 300mm cooktop on a base, the Blue Seal G512D and Waldorf RN8200G come on a leg stand or cabinet.

Can I get the C3D with a different top?
Yes. The other 300mm Cobra top is the C3C (300mm grill), all at the same price.

Does the C3D have a pilot?
Not as standard. The open burners have flame failure, so you light the burner each time you use it. A pilot with flame failure on the open burners is available as an extra for $380 plus GST, $380 for each 300mm section. Just pick it on this page. The Waldorf RN8200G has a pilot on every burner as standard.

How fine is the burner control?
Each gas valve runs from high to low, with settings in between.

Does the C3D run on natural gas or LPG?
Either. Just let us know which when you order.

What gas connection does the C3D need?
A 3/4 inch BSP male connection at the rear. The regulator comes with it and your gas fitter fits it.

How much gas does the C3D use?
Each open burner is rated at 22MJ/hr, so 44MJ/hr (11kW) with everything on full.

Do I need a hood over the C3D?
Yes. All gas cooking equipment needs a hood to take away the exhaust gases.

How do I clean the C3D?
The burner caps lift off and the burners come out, and the potstands and spill trays lift out to wipe down. All the parts are reached from the front for service.

What is the difference between Cobra, Blue Seal and Waldorf?
All three are made by Moffat in New Zealand. Cobra is the lower cost line, as a bench model. The Blue Seal G512D adds bigger 28MJ/hr burners and more base options. The Waldorf RN8200G adds a pilot on every burner and colour options.

What are the dimensions of the C3D?
305mm wide and 800mm deep. It is 485mm high to the top of the splashback.

How much does the C3D weigh?
32kg.

How much is delivery on the C3D?
Delivery is typically $120 plus GST. Use the Freight Cost Guide button on this page for the exact price to your postcode, including whether a tailgate is needed.

Do you ever have scratch and dent C3D cooktops?
Sometimes. These are Moffat units with freight damage or ex display stock, subject to availability. Ask us what is on hand.

Contact

Phone or Text: 0412 034948
Email: sales@eattucker.com

Warranty Information

2 years on site parts and labour by Moffat Australia