Product Overview
| Model | IN514HR2-L |
| Product | Induction cooktop |
| Zones | 4 round zones |
| Zone size | 300mm each |
| Power | 10kW 3ph (2.5kW per zone) |
| Supply | 415V, 16A per phase |
| Controls | Knob per zone, infinitely variable |
| Surface | 6mm ceramic glass |
| Width | 600mm |
| Depth | 818mm |
| Height bench | 525mm |
| Height on base | 1085mm |
| Splashback | High |
| Weight | 110kg |
| Hood | Required |
| Made by | Moffat |
| Made in | New Zealand |
| Warranty | 2 years on site |
The Blue Seal IN514HR2 is a 600mm four zone induction cooktop with four 2.5kW round zones, 300mm each, on 6mm ceramic glass. It runs on 415V three phase at 16A per phase, 10kW in total, so a hood is required. It comes on a bench, leg stand or cabinet base. Made in New Zealand by Moffat, with 2 years on site parts and labour.
Best for: swapping out a four burner gas top for induction, a cafe or small kitchen running four pans in 600mm, or a sauce and side station on a busy line.
IN514HR2 overview
The IN514HR2 is the 600mm induction cooktop in the Blue Seal range, with four 2.5kW round zones in two pairs, front and back, each with its own knob. It takes the same 300mm zones as the 450mm IN512HR2, doubled up into a 600mm top. If you need more power per pan in a narrower top, the IN512HF has two 5kW full area zones in 450mm.
How induction cooks
Induction turns power into a high frequency field that heats the base of the pan directly. The glass is not the heat source, so very little heat is lost into the kitchen and the cooktop reacts straight away to the knob. Lift a pan off and that zone switches off by itself. There is no flame and no gas fumes, so the kitchen stays cooler and cleaner.
IN514HR2 or IN512HR2?
Both use the same 2.5kW round zones and the same choice of bases. The difference is the width, the number of zones, and the hood.
| Model | IN512HR2 | IN514HR2 |
| Width | 450mm | 600mm |
| Zones | 2 round 300mm | 4 round 300mm |
| Power | 5kW 3ph | 10kW 3ph |
| Supply | 415V, 8A per phase | 415V, 16A per phase |
| Hood | Not required | Required |
Simple to use
One large knob per zone with infinitely variable power. A green light shows a zone is heating and a pan is detected, and a second green light shows an error. The cooking surface is fully sealed, the stainless air intake filters pull out for cleaning, and service access is from the front.
Choose your base
The IN514HR2 comes as a bench model, on a leg stand, on a cabinet, or on a cabinet with doors. All stand on legs with adjustable feet. Rollers for the rear are an extra on the leg stand and cabinet. Just pick the base on this page.
Warranty and support
2 years on site parts and labour by Moffat Australia. See our warranty page for the details.
Frequently asked questions
Who makes the Blue Seal IN514HR2?
Moffat makes the Blue Seal IN514HR2 in New Zealand, and backs it in Australia with 2 years on site parts and labour.
What pans can I use on the IN514HR2?
Most pans work.
Do I need a hood over the IN514HR2?
Yes. At 10kW it is over the 8kW where a hood is required. If you cannot fit a hood, the 450mm IN512HR2 has two of the same 2.5kW zones at 5kW and does not need one.
What power supply does the IN514HR2 need?
415V three phase, 10kW, 16A per phase. Your electrician connects it.
Can I run all four zones at once on the IN514HR2?
Yes. Each zone has its own knob and runs at up to 2.5kW, so you can have four pans going at different heats.
Is there a single phase version of the IN514HR2?
No. It runs on three phase. On single phase, the single zone IN511HR3 has one 3.5kW round zone on 240V.
How big are the zones on the IN514HR2?
Each zone is 300mm. They suit everyday pots and pans, and four fit across the 600mm top.
Is induction as powerful as gas?
Induction puts the heat straight into the pan instead of heating the air around it, so very little is lost into the kitchen. It heats a pan fast, and the knob gives instant control up and down.
How does induction work?
The cooktop turns power into a high frequency field. The field is induced into the base of the pan, and the pan heats itself. The glass only gets hot from the pan sitting on it.
What happens if I lift the pan off?
Automatic pan detection switches that zone off, and the heat stops straight away.
How do I clean the IN514HR2?
Wipe down the sealed glass. Spills do not bake on like they do on a solid top, because the glass is not the heat source. The stainless air intake filters pull out for cleaning.
Will the glass crack?
The cooking surface is 6mm ceramic glass, made to take the heat of commercial cooking. Like any glass, a hard knock can damage it, so do not drop pans on it.
Does induction make the kitchen cooler?
Yes. There is no flame, so far less heat goes into the room, and there are no gas fumes like nitrogen dioxide or carbon monoxide.
Is induction reliable in a commercial kitchen?
Induction is a mature technology now. The modules are robust and long lasting, and everything is reached through the front for servicing.
What bases can I get the IN514HR2 on?
Bench model, leg stand, cabinet, or cabinet with doors. Just pick the base on this page.
Can I get rollers on the IN514HR2?
Yes. Rollers for the rear are available as an extra on the leg stand and cabinet. Standard is legs with adjustable feet.
Will the IN514HR2 line up with other Blue Seal equipment?
Yes. It is fully modular and lines up with the Blue Seal Evolution range for a matched suite.
What are the dimensions of the IN514HR2?
600mm wide and 818mm deep. Height including the splashback is 525mm on the bench model and 1085mm on a leg stand or cabinet.
How much does the IN514HR2 weigh?
110kg.
How much is delivery on the IN514HR2?
Delivery is typically $120 plus GST. Use the Freight Cost Guide button on this page for the exact price to your postcode, including whether a tailgate is needed.
Do you ever have scratch and dent IN514HR2 cooktops?
Sometimes. These are Moffat units with freight damage or ex display stock, subject to availability. Ask us what is on hand.
Contact
Phone or Text: 0412 034948
Email: sales@eattucker.com