Product Overview
The Blue Seal GT18 Gas Fryer 400mm is a 400mm single pan gas fryer built for steady service in a compact footprint.
| Model | GT18 |
| Type | Gas fryer |
| Production | 25kg/hr |
| Burners | Target burner |
| Power | 90MJ |
| Volume | 18 litres |
| Vat | Open pan |
| Cleaning | No heat tubes |
| Cold zone | Yes |
| Control | Dial |
| Range | 100-190°C |
| Ignition | Manual pilot |
| Gas | Natural or LPG |
| Regulator | Built in |
| Gas inlet | R ¾″ BSP male |
| Feet | Front feet, rear wheels |
| Width | 400mm |
| Depth | 812mm |
| Height | 1085mm |
| Weight | 57kg |
| Included | 2 x baskets, lid |
| Made by | Moffat |
| Country | New Zealand |
A 90MJ multi jet target burner heats an 18 litre open pan to fry up to 25kg an hour, and the open pan with a cool zone lets crumbs settle below the burner to keep the oil clean and lasting longer. Simple mechanical controls make it easy to run and cheap to maintain.
Blue Seal Evolution Series is made by Moffat. The GT18 runs on natural gas or LPG, so a licensed gas fitter makes the connection. Like all Moffat gas fryers, it has a gas regulator built in, so a separate regulator is not required and should not be fitted, since an extra regulator becomes a point of failure. The GT18 is supplied set to the gas type you order and includes a conversion kit, so if you order natural gas the LPG conversion kit comes with it for later use if you ever need to switch.
Best for: cafes, takeaways and smaller kitchens that want a reliable single pan fryer in a narrow 400mm space.
Does the GT18 need a gas fitter?
Yes. It connects to natural gas or LPG through an R ¾″ BSP male fitting, so a licensed gas fitter makes the connection.
Does the GT18 need a separate gas regulator?
No, and one should not be fitted. Like all Moffat gas fryers, the GT18 has a gas regulator built in, so it connects straight to the gas supply. Adding a second regulator in the line is unnecessary and becomes a point of failure, so the gas fitter should connect it without one.
Does the GT18 come with a gas conversion kit?
Yes. The GT18 is supplied set to the gas type you order and includes the conversion kit for the other gas type. So if you order natural gas, the LPG conversion kit comes with it, ready if you ever need to change the fryer over later.
What is the cool zone for?
The open pan has a cool zone below the burner where crumbs and batter settle away from the heat. That stops them burning and fouling the oil, so the oil stays cleaner and lasts longer, and the pan is easy to drain and clean through the 30mm drain valve.
Warranty
- 2 year warranty, backed by Moffat's Australian service network
Phone or Text: 0412 034948
sales@eattucker.com
