Product Overview
The Washtech XM is a slimline pass-through dishwasher built for commercial kitchens where space is tight but throughput still matters. At just 655mm wide it fits where a standard pass-through cannot, making it the right choice for narrow kitchen runs, compact venues and anywhere that needs the speed of a pass-through machine without the footprint of a full-size model.
Best for: Cafes, bars, restaurants and aged care facilities with narrow kitchen layouts that need pass-through speed and capacity in a compact format.
How the Washtech XM cleans
The XM uses an exclusive fan jet wash system delivering powerful spray coverage across the full 450mm rack. Racks pass through from one side to the other, allowing continuous loading during service without waiting between cycles. The sanitising rinse reaches 82°C and the 430mm wash chamber height handles large plates, bowls and serving dishes that undercounter machines cannot accommodate. AutoStart means the cycle begins automatically on hood closure, keeping service moving without any button pressing.
Key features
| Feature | Detail |
|---|---|
| Wash cycles | 60, 120 and 180 seconds |
| Throughput | Up to 900 plates per hour |
| Rinse temperature | 82°C (sanitising) |
| Wash system | Exclusive fan jet wash system |
| Controls | Hood start with PCB timing and heating control |
| AutoStart | Yes — starts automatically on hood closure |
| Rack size | 450 mm x 450 mm |
| Wash chamber height | 430 mm clearance |
| Dimensions | W 655 mm x D 660 mm x H 1,530 mm |
| Weight | 73 kg unpacked |
| Power | 240V / 15 amp single phase |
| Drainage | Built-in drain pump, dual chemical injectors |
| Filtration | Double filtration with scrap trays |
| Installation | Corner or inline |
| WaterMark certified | Yes — meets all Australian state health regulations |
| Construction | Fully welded marine-grade stainless steel |
| Made in | New Zealand |
| Warranty | 2 years parts and labour / 5 years on the cabinet |
Simple to run, easy to repair
The XM uses the same PCB control boards as the XP and XU — one for timing and one for heating. Both are simple, proven components. If one ever needs replacing, parts cost around $250 each and can be swapped quickly by any service technician. Push-button start and AutoStart mean any staff member can operate it with zero training. All service connections are supplied externally for quick and easy installation with no commissioning required.
Warranty and support
The Washtech XM is backed by Moffat Australia's national service network with parts stocked locally nationwide.
- 2-year comprehensive warranty on parts and labour
- 5-year warranty on the stainless steel cabinet
- Moffat national service and spare parts network
What's in the box
- Washtech XM slimline pass-through dishwasher
- 1 x 450 mm dish rack
- 1 x 450 mm cup rack
- Service connections for power, water, pumped waste, detergent and rinse fluid
- User and maintenance guide
Frequently asked questions
What is the difference between the Washtech XM and the Washtech XP? The XM is the slimline version of the XP. It is 50mm narrower at 655mm wide and uses a 450mm rack instead of the XP's 500mm rack. The wash system is also different, using an exclusive fan jet system rather than traditional wash arms. If your kitchen can accommodate a full-size pass-through, the XP offers more capacity. If space is the priority, the XM delivers pass-through speed in a significantly smaller footprint.
Does the Washtech XM need an exhaust hood? No. The XM runs on the same single-phase power supply as the XP and does not require an exhaust hood in standard commercial kitchen installations. Contact Sean if you need further information for your specific installation.
What rack size does the Washtech XM use? The XM uses 450mm x 450mm racks, slightly smaller than the standard 500mm rack used by the XP and UD. This is what allows the slimmer overall footprint.
Can it be installed corner or inline? Both. The XM supports corner or inline installation, giving you flexibility in tight kitchen layouts.
Does the Washtech XM need three-phase power? No. The XM runs on standard single-phase 240V 15-amp power, suitable for most commercial kitchen installations without special electrical work.
Is the Washtech XM WaterMark certified? Yes. WaterMark certified and compliant with health regulations in all Australian states.
For enquiries please contact
Phone: Sean 0412 034948
Email: sales@eattucker.com
Freight charges depend on weight and postcode. Typically under $100 metro Australia wide. Please email for details.
Scratch & Dent units subject to availability.
