Washtech PW3 Wide Body Pass Through Warewasher

The Washtech PW3 is the largest pass-through warewasher in the Washtech range — a heavy duty machine built for high-volume commercial operations that need to wash large quantities of crates, bins, pots, baking trays and standard 500mm dish racks. At 1,305mm wide with a 650mm high wash chamber, the PW3 takes two 500mm racks side by side in a single cycle, doubling throughput compared to a standard pass-through dishwasher. No lifting required — items are loaded directly from bench height on either side.

Best for: High-volume commercial kitchens, food processing facilities, aged care facilities, hospitals, schools and large catering operations that need to wash large volumes of crates, bins, pots and pans alongside standard dishwasher racks.

How the Washtech PW3 cleans

The PW3 uses two 1.5 kW wash pumps recirculating water at a combined 1,600 litres per minute through upper and lower stainless steel wash arms for powerful, even coverage across the full 1,305mm chamber width. Triple cycle selection of 2, 4 and 6 minutes allows operators to match the cycle to the load. The rinse booster elements ensure fast recovery between cycles and every load is sanitised at high temperature. A FastClean rounded wash tank with double filtration and scrap and pump inlet filters keeps wash water clean throughout service. The three-sided door provides full access to the wash chamber and the counterbalanced insulated two-piece door with safety stop switch allows fingertip lifting.

The PW3 uses the same PCB control boards as the Washtech X series — simple, reliable and inexpensive to repair. For a full explanation of how Washtech controls work across the range, see our Washtech controls guide.

Key features

PW3C — condenser version

The PW3C is the condenser version of the PW3 at $25,870 plus GST. It features a built-in heat condenser that captures steam from the wash cycle, eliminating the need for a ventilation hood. This makes it suitable for installations where fitting an exhaust hood is not possible. Contact Sean to discuss the PW3C option for your operation.

Warranty and support

The Washtech PW3 is backed by Moffat Australia's national service network with parts stocked locally nationwide.

• 2-year comprehensive warranty on parts and labour
• 5-year warranty on the stainless steel cabinet
• Moffat national service and spare parts network

What's in the box

• Washtech PW3 wide body pass-through warewasher
• 1 x 500 mm dish rack
• 1 x 500 mm cup rack
• 1 x 8 division cutlery container
• 1 x 435 mm cup cover
• 4 x 220 mm stainless steel legs
• User and maintenance guide

Frequently asked questions

How many racks can the PW3 wash at once? Two standard 500mm x 500mm racks simultaneously, side by side. This doubles throughput compared to a standard pass-through dishwasher and makes the PW3 suited to operations washing high volumes of both standard crockery and large items.

What large items can the PW3 wash? The 1,305mm wide x 650mm high wash chamber accommodates crates, bins, large pots, baking trays and other large kitchen equipment alongside standard dish racks. Custom wash carriages are available for specific items.

Does the PW3 need a ventilation hood? Yes. The standard PW3 requires a ventilation hood. The PW3C condenser version at $25,870 plus GST eliminates this requirement — contact Sean for details.

What power does the PW3 require? 3 phase N+E 415V 50Hz. This is a full 3 phase machine suited to large commercial kitchen installations.

Is the Washtech PW3 WaterMark certified? Yes. WaterMark certified and compliant with health regulations in all Australian states.

For enquiries please contact

Phone: Sean 0412 034948

Email: sales@eattucker.com

This is a large heavy machine — please email for a freight quote before ordering.